Evo VI build thread..
#32
Evolving Member
Thread Starter
#34
Evolving Member
Thread Starter
thanks for your kind comments...
#35
Evolving Member
Thread Starter
#38
Evolving Member
Thread Starter
she's ready for mapping soon... stock block+fp green 20psi for now. this motor has high mileage. so a forged rebuild is planned in the next 2-3 months. more boost to follow after that point...
#39
Evolving Member
Thread Starter
some progress...
ok...so moving forward with this build has been very slow lately. mostly because I have a Toyota Drag car which sucks up most of my funds...so the Evo is usually no.2 on the priority list right now...
Still gathering parts for my engine build...but I had the new 6262 gen2 turbo/44mm waste gate laying around..so decided to go ahead and at least fabricate the turbo kit.
Particulars...
*6262 gen2 turbo
*WEPR large runner Vband manifold
*WEPR 3" downpipe (a/c friendly)
*Tial 44mm
*Vband dump
The kit is stock A/c, radiator (and fan) friendly. This hot parts kit has been added to WEPR's product list for evo's (fits Evo 4-9)
The car is still on the FP s/s Green running 20psi...will switch to the larger turbo as soon as get the engine built...
Hope ya'll like it...
Still gathering parts for my engine build...but I had the new 6262 gen2 turbo/44mm waste gate laying around..so decided to go ahead and at least fabricate the turbo kit.
Particulars...
*6262 gen2 turbo
*WEPR large runner Vband manifold
*WEPR 3" downpipe (a/c friendly)
*Tial 44mm
*Vband dump
The kit is stock A/c, radiator (and fan) friendly. This hot parts kit has been added to WEPR's product list for evo's (fits Evo 4-9)
The car is still on the FP s/s Green running 20psi...will switch to the larger turbo as soon as get the engine built...
Hope ya'll like it...
The following users liked this post:
wickedep (Aug 17, 2016)
#42
Evolving Member
Thread Starter
yeah guys..the reason for slow progress is because of my other vehicle which is a FWD drag car. its a Toyota Starlet which i've been building for a while now...a.k.a money pit. My company specializes in fabricating all manner of parts for this vehicle platform..
current set up on the starlet is a top mount...
now currently busy fabricating a front-face set up for the Starlet.... (radiator needs to be moved away a little)...
just posted these up in case it tickled someones fancy
current set up on the starlet is a top mount...
now currently busy fabricating a front-face set up for the Starlet.... (radiator needs to be moved away a little)...
just posted these up in case it tickled someones fancy