FS: 2008 Matte Blue MR in WA
 

2008 Evolution MR with Nav, originally Phantom Black but now is wrapped in matte blue vinyl (The wrap is actually easier to keep clean than the paint was, just be sure you don't use brushes on the vinyl)
-Lifetime install warranty on wrap from Guardline in Puyallup Wa
-56K miles
-Recent retune by English Racing for 92/E85
-Has had all fluids changed recently including new trans fluid and filter, Motul RBF 600 for brakes and stock fluids for diff and transfer case.
-Recently aligned with extremely mild setting to prolong winter tire life.
-Car was built to max out points in NASA TT-A, but has not been raced due to my relocation to Seattle

It was recently featured on NWBuilt ( http://nw-built.com/?paged=3 ).
I am looking to get 32,000 obo as is, but I can keep some of the wheels and additional parts for an even lower price. I am super negotiable to a point, no 20K offers.

NOT CURRENTLY LOOKING TO PART CAR OUT

Mods
-AMS transmission cooler
-AMS front motor mount and bar 

-AMS intake 

-AMS upper and lower interooler pipes 

-ETS 4 inch intercooler

-AMS downpipe 

-AMS catalytic converter (street)

-AMS Test Pipe (track)

-AMS 3 inch exhaust 

-MAC 3 port boost controller 

-SSP deep transmission pan with trans temp sensor

-Injector Dynamics 1000cc injectors
-Ultimate Racing fuel pressure gauge and fuel filter 

-Evolution Dynamics Surge tank with walbro 255 fuel pump and upgraded lines
-English Racing dyno tune with dual maps for E85 and 93 octane 

-AST 4100 coilovers with Vorshlag camber plates (setup by Texas Track Works, Vorshlag was consulted to match their favorite rates as tested on their NASA TT MR). These were corner balanced as well.
-Whiteline Roll center kit

-Cobb front and rear sway bars 

-Perrin endlinks 

-Whiteline rear lower control arms
-Ti brake shims
-Carbotec Brake pads XP10 front XP8 rear (track)

-Girodisc Magic pads (street)
-ARP extended front wheel studs 

-Binary Engineering brake cooling kit

-JDM Fog light delete grills
-Rear fenders rolled by Texas Track Works, no damage to the paint, unable to tell they are rolled without feeling in wheel well.
-18×10.5 Enkei NT03+M wheels with 275/35/18 NT01 tires (Track)
-18×9.5 Volk Te37′s with new ss595 tires, currently less than 500 miles (street)
-Stock GSR wheels with Blizzak Snow tires
-CPE gauge pod with AEM digital Boost, Trans temp and AFR gauges (AFR is wired with USB to allow for logging

-Rally Armor mud flaps
 (I have an extra set of flaps as well)
-all gauges are color matched with blue LED's (originally Orange)
-JDP Do Luck carbon fiber lip never installed
-15mm bolt on spacers for front when running NT03's
-Hella supertones paint matched to powder coating under hood
-Most plastic rivets in wheel wheels and undertray swapped for stainless screws and capture nuts to allow for easier removal of trays

Negatives
-Dime sized area of wear on drivers side bolster. Not worn through, leather is discolored.
-Trunk plastics are removed to be able to reach coilover adjusters, but they will be included with sale. (Reinstalled rear panel)
-Undertray has small ripped section, but will include new unused center tray to replace if new owner decides to change it (This has since been changed out to the new undertray)
-Currently has snow tires mounted, really kills the look of the car as the stock GSR wheels tuck into the fender wells.


Car is currently located in Seattle WA, but I am willing to travel for a sale.

MORE PICTURES HERE : /
http://www.flickr.com/photos/palhan/6676135771/http://www.flickr.com/photos/palhan/6676135771/ by http://www.flickr.com/people/palhan/, on Flickr

http://www.flickr.com/photos/palhan/6266407222/http://www.flickr.com/photos/palhan/6266407222/ by http://www.flickr.com/people/palhan/, on Flickr

http://www.flickr.com/photos/palhan/6266406588/http://www.flickr.com/photos/palhan/6266406588/ by http://www.flickr.com/people/palhan/, on Flickr

http://www.flickr.com/photos/palhan/6265876759/http://www.flickr.com/photos/palhan/6265876759/ by http://www.flickr.com/people/palhan/, on Flickr

http://www.flickr.com/photos/palhan/6265875237/http://www.flickr.com/photos/palhan/6265875237/ by http://www.flickr.com/people/palhan/, on Flickr

http://www.flickr.com/photos/palhan/6067333491/http://www.flickr.com/photos/palhan/6067333491/ by http://www.flickr.com/people/palhan/, on Flickr

http://www.flickr.com/photos/palhan/6067877096/http://www.flickr.com/photos/palhan/6067877096/ by http://www.flickr.com/people/palhan/, on Flickr

http://www.flickr.com/photos/palhan/5378854556/http://www.flickr.com/photos/palhan/5378854556/ by http://www.flickr.com/people/palhan/, on Flickr

http://www.flickr.com/photos/palhan/5036240852/http://www.flickr.com/photos/palhan/5036240852/ by http://www.flickr.com/people/palhan/, on Flickr

http://www.flickr.com/photos/palhan/5083949266/http://www.flickr.com/photos/palhan/5083949266/ by http://www.flickr.com/people/palhan/, on Flickr

Wow, actually looks pretty good. How did you change the information display from the annoying red to blue?

Color matched LED's soldered in place.

Man that looks nice {thumbup}

Let me know if you part out with the lip or the TE37s and are willing to ship. Car looks great BTW.

GLWS.

I will keep you in mind.

Still open to offers, I am a motivated seller. I am starting to get the itch to head over to the Nissan dealer.

Since that is my EB parked next to him, i'll just chime in to say that the vinyl wrap job on this car is very good. There have been a few others who had questionable wraps, and this one looked really good.

Nice owner too. Sorry to see it go, but GLWS!

It has the snow tires on it now and it's ready for anything!
http://www.flickr.com/photos/palhan/6712777255/http://www.flickr.com/photos/palhan/6712777255/ by http://www.flickr.com/people/palhan/, on Flickr

http://www.flickr.com/photos/palhan/6712774893/http://www.flickr.com/photos/palhan/6712774893/ by http://www.flickr.com/people/palhan/, on Flickr

How much did the wrap cost to do like that?

2500-3500 depending on film

Over 20k in parts alone!

Looks awesome! What do you mean by wrap for 2500-3000?

To replicate the vinyl wrap on my car you are looking at 2500-3500 dollars depending on size of the vehicle and what type of vinyl film you use

WOW WOW......your selling it!?!?!?!?! Hopefully the car served you well...it was good to me...hopefully someone from NTEC grabs it up. Do I dare ask why your selling it?

JJ! It has been an awesome car. I am going to copy you again and go with Nissan lol. I have my eyes on Godzilla with an alpha kit.

I don't think it will stay in NTEC unless someone wants me to drive it back down.