Mark this thread as Unsold
FS: Twin tb set-up
FS: Twin tb set-up
This ia A2 design set-up. I have bought it from one of the members here. Before I even put it in I took it to my mechanic for little inspection. The manifold has been checked for all the leaks. All the linckages were fixed. Manifold is black and in perfect condition. The piping is already trimmed for the good fitment. I will add extra piping if you want to place your filter in other place. Everything is included.
I'm looking for $175 shipped.
Let me know.
I'm looking for $175 shipped.
Let me know.
How was it fixed up? explain, i thought the piping and the item itself had a lot of issues with leaking and pipe design?
Keep in mind folks, this will require a really good tune to be functional.
Keep in mind folks, this will require a really good tune to be functional.
Trending Topics
The secondary linckage was very weak; right by the secondary tb. My mechanic did all the job. Nothing is fallin apart.
There were minor leaks by the second tb. All that was fixed and sealed off.
As long you have fuel supply like fpr or 275cc injectors and afc you'll be fine.
You can adjust the second linckage the way you want it (when you want it to open) I had it set-up, so once you start the engine it runs on the first tb and the around 3000 or 4000 rpm second one opens.
Even if I won't sell this my next plan will be to run twin tb with the turbo set up. But that's later.
There were minor leaks by the second tb. All that was fixed and sealed off.
As long you have fuel supply like fpr or 275cc injectors and afc you'll be fine.
You can adjust the second linckage the way you want it (when you want it to open) I had it set-up, so once you start the engine it runs on the first tb and the around 3000 or 4000 rpm second one opens.
Even if I won't sell this my next plan will be to run twin tb with the turbo set up. But that's later.
I couldn't get the pic yet. But here is what has been changed.
If you look at this manifold (not my pice) this whole side was redone. No leaks, and that hinge was crappy. All the inside was removed and replaced with heavy duty steel piece.
Again, I'm just saying what was done to it.
http://mirageforums.net/album_pic.php?pic_id=420
If you look at this manifold (not my pice) this whole side was redone. No leaks, and that hinge was crappy. All the inside was removed and replaced with heavy duty steel piece.
Again, I'm just saying what was done to it.
http://mirageforums.net/album_pic.php?pic_id=420