Mark this thread as Unsold
FS[West]: Gen 2 ATP GTX 3576 kit with all install parts
May 31, 2017, 08:48 PM
#1
Gen 2 ATP GTX 3576 kit with all install parts
I have a like new Gen 2 ATP GTX 3576 Kit for sale--less than 100 miles on turbo
Never run at full boost, removed prior to tune because I decided to build a 2.2 motor and order a big EFR 8374 for track use
This Gen 2 turbo is rated at 750 HP, my Gen 1 3576 made 471 WHP (E85) on the 5150 MD, and I ran neck and neck with new Vipers and Z06s on straights. The Gen 2 version is rated for 100+ HP more.
Kit is READY TO INSTALL with highest quality custom fabbed parts and all accessories, fittings and hardware, see pics below--a standard Gen 2 kit from ATP requires you to supply your own intake/coupler, and UICP/coupler solution.
Basic Kit: $2,895 + shipping
Basic Kit + all recommended options: $3,760 + shipping
Basic Kit includes:
1. Gen 2 ATP GTX 3576 turbo (less than 100 miles): $2,100
Turbo recently cleaned and perfect condition verified by ATP a week ago after removal, see receipt for service and cleaning
2. 5150 full 3.5" intake with new filter (excellent condition): $210
3. Custom stainless steel UICP with perfect fit for Gen 2 compressor: $220
4. Turbosmart WGA: $135
5. Custom SS Oil Feed line with new 40 micron XRP filter, ATP restrictor banjos: $120
6. 4-Ply Silicon Couplers: $110
7. ATP Oil Drain line with new O-ring and gasket
8. ATP rear water line fitting
9. T-bolt clamps: $0
10. All hardware and fittings except oil and water feed crush washers (get new ones)
11. ATP installation instructions
Optional parts for sale--highly recommended:
12. AMS Downpipe (10K miles, excellent condition): $325
13. MAP cast stainless manifold (10K miles, won't crack like the OEM mani): $350
14. Synapse DV (new version): $190
15. Stage 8 mani-to-turbo locking bolts: $0
16. DP bolts: $0
Never run at full boost, removed prior to tune because I decided to build a 2.2 motor and order a big EFR 8374 for track use
This Gen 2 turbo is rated at 750 HP, my Gen 1 3576 made 471 WHP (E85) on the 5150 MD, and I ran neck and neck with new Vipers and Z06s on straights. The Gen 2 version is rated for 100+ HP more.
Kit is READY TO INSTALL with highest quality custom fabbed parts and all accessories, fittings and hardware, see pics below--a standard Gen 2 kit from ATP requires you to supply your own intake/coupler, and UICP/coupler solution.
Basic Kit: $2,895 + shipping
Basic Kit + all recommended options: $3,760 + shipping
Basic Kit includes:
1. Gen 2 ATP GTX 3576 turbo (less than 100 miles): $2,100
Turbo recently cleaned and perfect condition verified by ATP a week ago after removal, see receipt for service and cleaning
2. 5150 full 3.5" intake with new filter (excellent condition): $210
3. Custom stainless steel UICP with perfect fit for Gen 2 compressor: $220
4. Turbosmart WGA: $135
5. Custom SS Oil Feed line with new 40 micron XRP filter, ATP restrictor banjos: $120
6. 4-Ply Silicon Couplers: $110
7. ATP Oil Drain line with new O-ring and gasket
8. ATP rear water line fitting
9. T-bolt clamps: $0
10. All hardware and fittings except oil and water feed crush washers (get new ones)
11. ATP installation instructions
Optional parts for sale--highly recommended:
12. AMS Downpipe (10K miles, excellent condition): $325
13. MAP cast stainless manifold (10K miles, won't crack like the OEM mani): $350
14. Synapse DV (new version): $190
15. Stage 8 mani-to-turbo locking bolts: $0
16. DP bolts: $0
Last edited by lbcevo; Jun 1, 2017 at 07:44 PM.
Thread
Thread Starter
Forum
Replies
Last Post
FS[Pacific NW]: GTX 3576, ID1300, Map manifold, AMS downpipe and more
cleanIX
For Sale - Engine / Drivetrain / Power
8
Jan 9, 2017 07:31 PM
Hearts_Fitment
For Sale - Wanting To Buy (WTB) Or Trade (WTT)
7
Apr 4, 2013 08:22 AM