Mark this thread as Unsold
[FS] Custom Bespoke MR Front Grille Badges
#1
Newbie
Thread Starter
iTrader: (3)
Join Date: Aug 2011
Location: U.K.
Posts: 27
Likes: 0
Received 0 Likes
on
0 Posts
Custom Bespoke MR, GSR, SE & RS Front Grille Badges
Contact me on WhatsApp +447410967767 for a faster response.
GSR, SE & RS Badges now added.
GSR, RS & SE badges also available...
I made these myself for my friends EVO MR as he could not find an MR grille badge anywhere & he did not like the idea of gluing the same badge that's on the back of the car to the grille, he wanted a better/proper grille badge.
I am by no means a trader or mass producer of this item & this is not my sole business. This is something I do in my spare time as I am a self employed virtual reality technician by trade. There may be a short waiting time for productivity turn around as they are hand made to order by myself.
I am in the UK but I am willing to ship worldwide.
PRICES
£30 for the basic straight MR, slanted MR or GSR badge.
£35 for the MR FQ-BHP custom MR badge or EVOLUTION VIII or IX.
£20 for the RS or SE Badge.
£25 for the RS or SE badge with a BHP figure added.
They are finished with a gloss coating that provides UV protection from fading. The FQ-BHP text can be made in black or white, again please specify when sending payment.
Postage to USA: *FREE* for a 5 to 7 working day service) from UK to USA
PayPal accepted to : octag4n@hotmail.com (make sure you send the correct amount in GBP with a note/message telling me which badge you require when sending paypal payments)
Contact me on WhatsApp +447410967767 for a faster response.
All fixings are included, the grub screw bolts will just need screwing in with a Hex/Allen key. I won't do this myself to avoid any damage whilst in transit. Easy enough, just don't over tighten! I used black fixings so you can't see them once fitted. I tried silver at first but you could see the silver from certain angles & it didn't look very good, black are much better.
The fixing nuts are flanged, so no need for washers & they are also Nyloc so they won't come loose once fitted.
The front bumper will need to be removed prior to fitting but it depends on which side of the grille you are fitting the badge, as you can get access down the right hand side without taking off the bumper. You just need to remove one bolt from the top of the bumper & you can pull it away to allow you to get your hand in there.
Please let me know what you think? Any questions, or if you would like to order any of the badges, just shoot me a PM.
Thanks for looking,
Lee.
GSR, SE & RS Badges now added.
GSR, RS & SE badges also available...
I made these myself for my friends EVO MR as he could not find an MR grille badge anywhere & he did not like the idea of gluing the same badge that's on the back of the car to the grille, he wanted a better/proper grille badge.
I am by no means a trader or mass producer of this item & this is not my sole business. This is something I do in my spare time as I am a self employed virtual reality technician by trade. There may be a short waiting time for productivity turn around as they are hand made to order by myself.
I am in the UK but I am willing to ship worldwide.
PRICES
£30 for the basic straight MR, slanted MR or GSR badge.
£35 for the MR FQ-BHP custom MR badge or EVOLUTION VIII or IX.
£20 for the RS or SE Badge.
£25 for the RS or SE badge with a BHP figure added.
They are finished with a gloss coating that provides UV protection from fading. The FQ-BHP text can be made in black or white, again please specify when sending payment.
Postage to USA: *FREE* for a 5 to 7 working day service) from UK to USA
PayPal accepted to : octag4n@hotmail.com (make sure you send the correct amount in GBP with a note/message telling me which badge you require when sending paypal payments)
Contact me on WhatsApp +447410967767 for a faster response.
All fixings are included, the grub screw bolts will just need screwing in with a Hex/Allen key. I won't do this myself to avoid any damage whilst in transit. Easy enough, just don't over tighten! I used black fixings so you can't see them once fitted. I tried silver at first but you could see the silver from certain angles & it didn't look very good, black are much better.
The fixing nuts are flanged, so no need for washers & they are also Nyloc so they won't come loose once fitted.
The front bumper will need to be removed prior to fitting but it depends on which side of the grille you are fitting the badge, as you can get access down the right hand side without taking off the bumper. You just need to remove one bolt from the top of the bumper & you can pull it away to allow you to get your hand in there.
Please let me know what you think? Any questions, or if you would like to order any of the badges, just shoot me a PM.
Thanks for looking,
Lee.
Last edited by Octag3n; May 22, 2020 at 11:28 PM. Reason: Added fitted pictures.