8UpUrV8

iTrader: (9)

Very little use on this, got this several years ago but no time for this and it sitting in my garage cabinet is not doing anyone any good! $1999 picked up! Text preferred/call/PM 832 four7two 9zero1ate, GTR4438@gmail.com

Thanks in advance for looking!

HTP Invertig 201 (4-200AMPS, 200A@35%, 135A@100% , welds ALUMINUM, weighs 68 lbs, 240V 30 amp breaker.)



http://www.usaweld.com/Invertig-201-Welders-s/27.htm

Comes with:
HTP brand:
-Air cooled torch with lightweight flex hose
-Ground wire/clamp
-Foot pedal
-Regulator
-Gas line from gas cylinder to welder
-Magnetic torch holder
EXTRAS:
-1/16” 2% ceriated tungsten -$15
-1/16” 1.5% lanthanated tungsten -$15
-1/8” 2% thoriated tungsten -$15
Welding wire with costs I paid:
70S6 3/32 2 lbs- $21.50
70S6 1/16 2 lbs- $21.50
4043 3/32 2 lbs- $21.95
4043 1/16 2 lbs- $21.95
308L 1/16 2 lbs- $28.00
1/8" E6010 Radnor® 6010 Carbon Steel Electrode 10# Box - $31.86
3/32" E7018 Radnor® 7018 Carbon Steel Electrode 5# Box - $18.27
3/32" E6010 Carbon Steel Electrode 5# Box - $15

SPECS:
INVERTIG 201
Specifications #70201-12.5
Input Voltage 230 volts +/- 20%
Input Amperage 30 amps
Output Amperage 4 to 200 amps
Maximum Thickness-
Steel
Aluminum
3/8"
1/4"
Duty Cycle 35% @ 200 amps
60% @ 160 amps
100% @ 135 amps
No Load Voltage 65 volts
Arc Voltage 10 to 18 volts
Torch Length & Type 17 series 12½' long
Foot Pedal Length 12.½' long
Slope Down 0.1 to 10 sec
Pre-Gas Flow 0.5 sec
Post Gas Flow 2 to 20 sec
Final Current 0 to 99 amps
DC Pulsing Frequency 0.4 to 300 Hz
AC Pulsing Frequency 0.4 to 2 Hz
Pulsing Duty Cycle 65% - 30%
Pulsing Base Current 10% - 90%
AC Frequency 20 to 200 Hz
Balance Control 10 to 90%
Weight 68 lbs.
Size 20" L x 9 ½" W x 21" H

Jp7

iTrader: (11)

badass, inverter welders are great. I use one for welding aluminum. glws!

MinusPrevious

iTrader: (3)

Bump

FS posts on EVOM MUST INCLUDE:
PICTURE OF THE ITEM WITH A SIGN CONTAINING THE DATE AND YOUR EVOM USERNAME

Thanks

8UpUrV8

iTrader: (9)

Sorry, updated, thanks!

8UpUrV8

iTrader: (9)

Bump