Looking to sell my 1996 Eagle Talon. This is a project car that I would say is 3/4 of the way done. Been working on it 3 yrs now and well over 15K invested. Times are tough and need the money. Things it needs to basicly be finished it turbo , exhaust and inner cooler with a few small odds and ends. I do have recipts for everything. Motor was built by Eastwoods Machine shop in somers and Tranny was built by TRE. All Items are located in enfield , CT.

Sorry evom not to be a a>>hole , but there is over 115 pics already taken , and no way i am retaking all the pics with date and time. All pics are located in my facebook page and the pics are tagged with dates and times.

Pics located here :
http://www.facebook.com/media/set/?s...0f4caf3&type=1




Engine:
2.0l
Bored .20 over with Wisco HD 9.0:1 pistons
Manley H beam rods
ACL race bearings rods and mains
Arp main and head studs
Mitsu MLS head gasket
Stock crank balanced and polished to over 10K rpm
The entire motor was balance and blue printed.
Head Ported and polished , flow benched over 30cfm per port in stock which brought it 301cfm over all. Stock 1g heads flow about 271cfm
1mm ss over sized valve
Ferra intake and exhaust valve guides
Ferra Billet Valve locks
Ferra valve seals
GSC beehive springs rated up to 12.5 mm lift and over 11kprm
GSC chromolly spring seats
GSC titanium retainers
New 3rd gen lifters
New water pump
New oem timing belt , tensionor , pulleys
Balance Shaft removal kit
Oil cooler filter housing for running external oil cooler
Poly motor mounts

Tranny:
Basic Stage 1 build froom tre with double syncros in all gears
ACT 6 puck clutch w/extreme duty pressure plate
New oem slave cylinder
New oem Master cylinder

Misc:
Ebc brakes all around
walbro 255 fuel pump
fuel pump relay mod
battery relocation kit
tokio 5 way adjustable
tons of parts cleaned and powder coated
new magnacore wires
over 2000 dollars invested in oem interior parts
Aeromotive fuel regulater

I am sure I am missing some things , but call or text me at 860-882-3553 thats my cell. If i dont answer its cause I a got a throat cold thats killing me and cant talk. Car is avaible to view all weekend and anytime after 5 or so during the week.
I have over 100 pics of the car on my facebook page over documenting the build. You can look me up "David Schlickting" Not sure if u can view the pics without being friends or not. Let me know and if you got to friend request me just send a message with the request stating ur intrested in the talon. Thanks