Mark this thread as Unsold
BlowerMotor/AC Stuff/Flywheel/HeaterCore/EvapCore/Airbags/TonsofRandomStuff/Rotors
BlowerMotor/AC Stuff/Flywheel/HeaterCore/EvapCore/Airbags/TonsofRandomStuff/Rotors
I have plenty more interior trim and other pieces for sale, but this is the stuff I have current pictures of. If there is anything else you might need, shoot me a message and I will see if I have it. I have almost a full car worth of random stuff.
Blower Motor with box (easy install!) $50
http://s7.postimage.org/6gdqwelkr/BLOWERMOTOR.jpg
AC Condenser $50
http://s7.postimage.org/yxgu8cgxn/CONDENSER.jpg
Drivers AirBag $100
http://s14.postimage.org/ts6zt8si9/DRIVERSAIRBAG2.jpg
Evap Core/Heater Core with box (easy install!)
http://s9.postimage.org/st3iw0cun/EV...HEATERCORE.jpg
Evo8 Tail lights $75
http://s10.postimage.org/ttaqdhx6h/EVO8_TAILLIGHTS.jpg
Flywheel. About 30k miles on it, the marks on it are not heat spots, it is surface rust from sitting and can be quickly sanded off. It was removed when I went to a twin setup with my 5-speed conversion. $75
http://s7.postimage.org/xxzq44gjf/FLYWHEEL.jpg
Front rotors. Pulled off when I went to a small brake setup. 1 slow turn will take the surface rust off of them $25
http://s10.postimage.org/x92un1uex/FRONTROTORS.jpg
MR center console $25
http://s18.postimage.org/v0i8sctop/MRCONSOLE.jpg
Trunk Latch panel $15
http://s9.postimage.org/xcyljv573/TRUNKPANEL.jpg
If there is anything else random you need, let me know and I will see if I have it.
Prices do NOT include shipping.
Thanks!
Mike
Blower Motor with box (easy install!) $50
http://s7.postimage.org/6gdqwelkr/BLOWERMOTOR.jpg
AC Condenser $50
http://s7.postimage.org/yxgu8cgxn/CONDENSER.jpg
Drivers AirBag $100
http://s14.postimage.org/ts6zt8si9/DRIVERSAIRBAG2.jpg
Evap Core/Heater Core with box (easy install!)
http://s9.postimage.org/st3iw0cun/EV...HEATERCORE.jpg
Evo8 Tail lights $75
http://s10.postimage.org/ttaqdhx6h/EVO8_TAILLIGHTS.jpg
Flywheel. About 30k miles on it, the marks on it are not heat spots, it is surface rust from sitting and can be quickly sanded off. It was removed when I went to a twin setup with my 5-speed conversion. $75
http://s7.postimage.org/xxzq44gjf/FLYWHEEL.jpg
Front rotors. Pulled off when I went to a small brake setup. 1 slow turn will take the surface rust off of them $25
http://s10.postimage.org/x92un1uex/FRONTROTORS.jpg
MR center console $25
http://s18.postimage.org/v0i8sctop/MRCONSOLE.jpg
Trunk Latch panel $15
http://s9.postimage.org/xcyljv573/TRUNKPANEL.jpg
If there is anything else random you need, let me know and I will see if I have it.
Prices do NOT include shipping.
Thanks!
Mike
Last edited by SmokingTires; May 6, 2013 at 05:03 PM.
Also have a 6-speed conversion kit, 6-speed transmission needs one of the mount tabs welded. $300
MR rear seats make an offer,
tons of interior trim
all prices are OR BEST OFFER!
MR rear seats make an offer,
tons of interior trim
all prices are OR BEST OFFER!
Thread
Thread Starter
Forum
Replies
Last Post
FS[Pacific NW]: FFTec 3076r Hot Parts Kit and extra parts
Seancj
For Sale/WTB - Engine / Drivetrain / Power
4
Apr 1, 2015 07:12 PM



