Mark this thread as Unsold
Evo 8/9 parts: APR CF wing trunk Spoolinup COP Hawk DTC-70 pads +more
#33
Autopower roll bar is sold.
Added more items to first page (with pictures of everything):
Schroth Rallye 4 four-point lap and shoulder harness - $120. DOT approved, 2" wide straps, black. More info ($190 new: http://www.soloracer.com/rallye4.html) *** SOLD ***
SPAL slim fan, 13" diameter, only 2" deep *** SOLD ***
OEM timing belt tensioner for Evo 9, part # MR984375, brand new - $80 *** SOLD ***
OEM front inner splined axle (stub shaft) for Evo 8/9, good condition, passenger side only - $25 *** SOLD ***
Samco Sport 4-ply high-temp silicone intake tube for Evo 8/9, larger bore and perfectly smooth inside to make more power than the OEM snorkel pipe *** SOLD ***
Added more items to first page (with pictures of everything):
Schroth Rallye 4 four-point lap and shoulder harness - $120. DOT approved, 2" wide straps, black. More info ($190 new: http://www.soloracer.com/rallye4.html) *** SOLD ***
SPAL slim fan, 13" diameter, only 2" deep *** SOLD ***
OEM timing belt tensioner for Evo 9, part # MR984375, brand new - $80 *** SOLD ***
OEM front inner splined axle (stub shaft) for Evo 8/9, good condition, passenger side only - $25 *** SOLD ***
Samco Sport 4-ply high-temp silicone intake tube for Evo 8/9, larger bore and perfectly smooth inside to make more power than the OEM snorkel pipe *** SOLD ***
Last edited by EGbeater; Apr 18, 2014 at 01:58 PM. Reason: all items in this post are sold
#38
I have two sets of Enkei RPF1, both for sale:
18" x 10" +38, silver, about six months old, near perfect condition *** SOLD ***
18" x 9.5" +38 / 18" x 10.5" +15, hyper gunmetal gray (limited edition color), 3 1/2 years old, some chips in the paint from many autox events, $1100 with 285/35-18 Hoosier A6s *** SOLD ***
The staggered setup (wider and more track width in the front) is ideal for SM autox to negate understeer but precludes being able to rotate the wheels front to rear for more even tire wear.
18" x 10" +38, silver, about six months old, near perfect condition *** SOLD ***
18" x 9.5" +38 / 18" x 10.5" +15, hyper gunmetal gray (limited edition color), 3 1/2 years old, some chips in the paint from many autox events, $1100 with 285/35-18 Hoosier A6s *** SOLD ***
The staggered setup (wider and more track width in the front) is ideal for SM autox to negate understeer but precludes being able to rotate the wheels front to rear for more even tire wear.
Last edited by EGbeater; Sep 15, 2014 at 08:35 AM.
#42
Evolved Member
iTrader: (15)
looking for, all from EVO 9:
sensors:
throttle position sensor + housing/bolts
mivec solenoid
throttle position sensor
camshaft angle sensors, housings, covers, bolts etc (complete)
front o2 sensor
rear o2 sensor
oil pressure sensor
thermostat housing
fuel:
fuel hanger/cage (dont need pump), full assembly
fuel gauge sender unit + hoses
fuel rail, stock + lines (complete)
mounts/covers:
upper timing belt cover, bolts, gaskets (complete)
passenger side motor mount
passenger side mount bracket & bolts
passenger side chassis brace for mount (this is welded, but wondering if it can be cut out?)
thanks
sensors:
throttle position sensor + housing/bolts
mivec solenoid
throttle position sensor
camshaft angle sensors, housings, covers, bolts etc (complete)
front o2 sensor
rear o2 sensor
oil pressure sensor
thermostat housing
fuel:
fuel hanger/cage (dont need pump), full assembly
fuel gauge sender unit + hoses
fuel rail, stock + lines (complete)
mounts/covers:
upper timing belt cover, bolts, gaskets (complete)
passenger side motor mount
passenger side mount bracket & bolts
passenger side chassis brace for mount (this is welded, but wondering if it can be cut out?)
thanks