EvolutionM - Mitsubishi Lancer and Lancer Evolution Community - WTS : T3 turbo kit ... 4" intercooler and Upper piping n more

WTS following parts : T3 turbo kit which has the following parts...

For serious power upgrades on the Evo 10 look no further than an ETS Turbo Kit. Packed with features like high flowing Equal Length ETS Manifold, true Merge Collector, full 3” Downpipe, direct routed Wastegate Dump, low angle turbo outlet, high flow upper intercooler pipe, Tial 44mm Wastegate, and any T3/T4 or Garrett GT series turbos, these kits will get the job done, street or track. Along with great performance, Features such as an exhaust flex, T-Bolt Clamps, 4ply silicone, and braided oil lines, will help make sure that you do not have to use the ETS Life Time Warranty!
Includes:

Turbocharger
Stainless Steel Downpipe
Exhaust Manifold
44mm TiAL Wastegate
Wastegate Dump Tube
Upper Intercooler Pipe
Oil Feed and Drain Lines
Water Feed and Drain Lines
Turbo Gaskets and Hardware
Clamps and Couplers
Includes Everything Needed For A Complete Install
This is the same kit we set our worlds fastest Evo x pass with... The only Evo X in the 9's.

Plus 4" intercooler 20x12x4.0 Bar & Plate Core - 820hp Direct Replacement

ETS Mitsubishi Evo X and Evolution X Intake -
5" KN Filter
ETS Milled MAF Adapter
Perfrect Transition From Adapter To MAF
Blow Off Valve Recirculation Tube
Includes heat shield to prevent idle surge.
BOV Vacuum Line
All Couplers, Clamps and Hardware.
+56whp when used with a boost controller @ 22psi

All parts are from ETS only has about 1500 miles on them if that... going to post pictures of it very soon thanks PM me with offers... or will give a big discount if somoene wants to buy them as a whole