Hardware

iTrader: (17)

Stock BBS wheels sold today, looks like I'm keeping these for now.

I'm the original owner of these wheels. The light brown alumite center caps are included. The front caps are deep version and rear are shallow.

I first used these on an Evo 8 and now an Evo X. I'll leave pictures of both cars for visual stimulation.

5-114.3 is the bolt pattern. +29 is an offset. Dark gun metallic is the color.

One wheel has 3 areas where there are chips on the spoke/face area. No curb rash. Take note of one picture. You'll see little pits on the side of the spoke. If you plan to use wheels this sort of stuff will happen with road debris.

The tires are Dunlop Direzza Z1 star spec.

Any questions please let me know.













small chip on side of spoke



small chips on side of spoke. You'll see this on many or most spokes.

Hardware

iTrader: (17)

During the winter this is how they are stored. I'm probably a bit overboard when it comes to stuff like this.




It's probably a sickness.


Felt padding ones onto the face of each wheel.


The wheels then go inside of this. I have this, but just realized I don't have a picture of it in use.

jheff

Did you have to use any spacers on these when you had them on the 8?

Hardware

iTrader: (17)

No spacers. When the tires were brand new they would hit the inner fender at full lock. That's the only "issue" I ran into.