Mark this thread as Unsold
[WTB] Xona turbo, Injectors, intercooler, 4g64 block, takata, supertech
Mar 1, 2016, 04:09 AM
#1
Newbie
Thread Starter
Join Date: Feb 2012
Location: Berlin, NH
Posts: 23
Likes: 0
Received 0 Likes
on
0 Posts
Xona turbo, Injectors, intercooler, 4g64 block, takata, supertech
I am looking for some things to complete my 2.2 build. Im looking for two Bosch 044 fuel pumps, FIC/ID 2000cc injectors, curt brown extreme port intake manifold with 70mm TB flange, 70mm throttlebody, STM/buschur/ETS intercooler with 3 inch outlet, 3 inch UICP with Tial flange, takata harnesses, and front c west canards.
If anyone has a clean non mivec 4g64 block pm me. I would preferably want a fully cleaned and inspected block with documentation if possible. Must be willing to ship.
If anyone has anything they might want to sell or could possibly help me, the pm or comment with information. I am already going with a 2.2 Magnus rotating assembly so Im not looking for rods or pistons.
If anyone has a clean non mivec 4g64 block pm me. I would preferably want a fully cleaned and inspected block with documentation if possible. Must be willing to ship.
If anyone has anything they might want to sell or could possibly help me, the pm or comment with information. I am already going with a 2.2 Magnus rotating assembly so Im not looking for rods or pistons.
Last edited by Olms2468; Apr 10, 2016 at 08:15 AM.
Mar 3, 2016, 05:51 PM
#3
I am looking for some things to complete my 2.2 build. Im looking for two Bosch 044 fuel pumps, FIC/ID 2000cc injectors, supertech Dual valve springs, curt brown extreme port intake manifold with 70mm TB flange, 70mm throttlebody, STM/buschur intercooler with 3 inch outlet, 3 inch UICP with Tial flange, built/rebuilt head with documentation, takata harnesses, and Xona Rotors 7864 T3 Turbo.
If anyone has anything lying around that is specifically needed for a 4G64 build, please let me know. I am already going with a 2.2 Magnus rotating assembly so Im not looking for rods or pistons.
If anyone has anything lying around that is specifically needed for a 4G64 build, please let me know. I am already going with a 2.2 Magnus rotating assembly so Im not looking for rods or pistons.
I have a huge percentage of the parts you are after.... pm me.
Mar 4, 2016, 10:56 AM
#5
Evolving Member
iTrader: (19)
Join Date: Feb 2006
Location: York, PA
Posts: 221
Likes: 0
Received 0 Likes
on
0 Posts
It is not what you are looking for, but I have am ETS full intercooler kit, brand new, in the box, for an Evo 8. Short route piping (mini battery) and intake.
Mar 4, 2016, 11:03 AM
#6
I am looking for some things to complete my 2.2 build. Im looking for two Bosch 044 fuel pumps, FIC/ID 2000cc injectors, supertech Dual valve springs, curt brown extreme port intake manifold with 70mm TB flange, 70mm throttlebody, STM/buschur intercooler with 3 inch outlet, 3 inch UICP with Tial flange, built/rebuilt head with documentation, takata harnesses, and Xona Rotors 7864 T3 Turbo.
If anyone has anything lying around that is specifically needed for a 4G64 build, please let me know. I am already going with a 2.2 Magnus rotating assembly so Im not looking for rods or pistons.
If anyone has anything lying around that is specifically needed for a 4G64 build, please let me know. I am already going with a 2.2 Magnus rotating assembly so Im not looking for rods or pistons.
Trending Topics
Apr 23, 2016, 01:29 PM
#10
hey man. I have a ETS 4" Wide tank FMIC with 2.5" inlet and outlet. I used this with a 2.0LR 6766 setup making 700hp with ease on a mustang dyno. You can have the outlet changed to 3" if needed or just use a reduction coupler like I did for your 3" UICP. $550obo +shipping.
Adam
Adam
Thread
Thread Starter
Forum
Replies
Last Post
ch53avitech
Evo Engine / Turbo / Drivetrain
5
Sep 25, 2015 09:49 AM
djikonatx
For Sale/WTB - Engine / Drivetrain / Power
60
Sep 13, 2013 11:08 AM
mrboost05
For Sale/WTB - Engine / Drivetrain / Power
9
Mar 6, 2013 09:58 AM
bostonhatcher
For Sale/WTB - Engine / Drivetrain / Power
26
Oct 10, 2012 08:33 AM