Xska555

iTrader: (13)

Im selling my AMS oil pan Ive had for many years. The pan has only seen track life and the motor finally blew, dropped a valve smashed piston causing havoc. Metal bits through out entire motor and oil pan


Im sure theres metal bits inside the kick out that's behind the trap door (that's the bad part) and the rest of the inside pan will need a serious cleaning one that probably only a machine shop could perform with there special washers and hot tanks. Theres a slight ding on the small bracket that holds the studs for the turbo oil line return, probably part of the piston and another slight ding underneath the pan that's hardly noticeable. I cleaned it the best I could for shipping.


After a good cleaning it should be good to go.


Asking $350 + shipping comes w/ oil pick up and windage tray which was never used.


by https://www.flickr.com/photos/141607792@N07/, on Flickr


by https://www.flickr.com/photos/141607792@N07/, on Flickr


by https://www.flickr.com/photos/141607792@N07/, on Flickr


by https://www.flickr.com/photos/141607792@N07/, on Flickr


by https://www.flickr.com/photos/141607792@N07/, on Flickr


by https://www.flickr.com/photos/141607792@N07/, on Flickr


by https://www.flickr.com/photos/141607792@N07/, on Flickr


by https://www.flickr.com/photos/141607792@N07/, on Flickr

Xska555

iTrader: (13)

Sold