elhalisf |
Sep 28, 2005 08:27 AM |
FS: Exedy Stage 3 Hyper Single!
I have an exedy stage 3 hyper single clutch setup. This setup comes with the lightened flywheel, 225mm 6 puck sprung hub disk, and pressure plate. Clamp load is 2655lb and perfect for daily driving.
The pressure plate and flywheel are used, and both where resurfaced with only 0.007 inches removed from each. 0.014 was removed from the tabs to make sure the pressure plate has the correct step height. This service was preformed by clutch masters in Detroit. Clutch masters is the MAIN service place for exedy its self, so you can trust they know their stuff. The 6 puck disk BRAND NEW, which was purchased from clutch masters. A receipt will be provided with the purchase of the clutch.
The bolts are not the original type bolts, but they are the exact size and type.
This setup is ready to go and will perform EXACTLY like a new setup would. It cost me $400 for the machining and the new disc. pm me with an offer!
pic 1
pic 2
pic 3
pic 4
pic 5
pic 6
|