FS: Evo 7 oem SAS / Antilag setup
I'm selling a complete SAS system off of an Evo 7 engine. I haven't seen too many of these for sale so I'm having a hard time figuring out where to start pricing it. Comes with valve, piping, bracket and 2 bolts for the manifold.
Parts are located in ABQ, NM and I'm willing to ship. SOLD!!! Thanks, Sean 505- 72o-97o2 http://i304.photobucket.com/albums/n...on/EvoSAS1.jpg http://i304.photobucket.com/albums/n...on/EvoSAS2.jpg http://i304.photobucket.com/albums/n...on/EvoSAS3.jpg http://i304.photobucket.com/albums/n...on/EvoSAS4.jpg http://i304.photobucket.com/albums/n...on/EvoSAS5.jpg |
re title this thread as evo 7 anti lag setup and you'll probably get more people in here.
|
Originally Posted by TigOLDBiTTies
(Post 9872108)
re title this thread as evo 7 anti lag setup and you'll probably get more people in here.
"FS: Evo 7 oem SAS / Antilag setup" Thanks, Sean |
Bump!!!
|
What about the stock Evo VII manifold? Do you have it...? Would make a great combo. ;)
|
Originally Posted by HISEVO7
(Post 9873227)
What about the stock Evo VII manifold? Do you have it...? Would make a great combo. ;)
Sure do!! It can be seen in the pics on the 1st post. I haven't removed it yet and will include it for an additional $50 shipped. It is drilled for an EGT probe though. Apparently there's also a solenoid under the intake manifold for activating the SAS valve. It's the same as a stock boost control solenoid. I'll check it out when I get home from work and see if it's easily removable and if so, will be included for no extra cost. |
Ok. Let me know. Thanks.
Originally Posted by 3bar_dc2
(Post 9873314)
Sure do!! It can be seen in the pics on the 1st post. I haven't removed it yet and will include it for an additional $50 shipped. It is drilled for an EGT probe though.
Apparently there's also a solenoid under the intake manifold for activating the SAS valve. It's the same as a stock boost control solenoid. I'll check it out when I get home from work and see if it's easily removable and if so, will be included for no extra cost. |
I got the sas vacuum tank, tank bracket and solenoid removed. Ill work on getting the manifold removed this weekend. Some of the nuts are seized so it'll take me a little bit.
|
...
|
Let me know when you are ready. :-) :mitsu:
|
Originally Posted by HISEVO7
(Post 9875491)
Let me know when you are ready. :-) :mitsu:
|
how much for teh sas valve alone. mine has gone bad
|
...I really just need the evo VII manifold, if that helps answer MadCrix's question... :mitsu:
|
I'd like to sell the sas setup as a complete kit since I would probably have a hard time just selling the lines and vacuum tank. 100 shipped for the full sas system. If going to the same buyer, I'll include the evo7 manifold for an additional 50 shipped. If the manifold is sold separate, I'd be looking at 65 shipped. the 50 shipped on the manifold was because of saving on combined shipping.
I've almost got the manifold pulled. $30 for a bolt/nut extractor set at sears was money well spent lol. Edit: just noticed you're out of country. I'd have to get a shipping quote for ya. |
And...... Manifold is now off :)
|
All times are GMT -7. The time now is 09:07 PM. |
© 2024 MH Sub I, LLC dba Internet Brands