-12AN Earl's Perform-O-Flex Stainless Braided Hose
 

Hey EvoM!

Up for sale are three 10" sections of Earl's Perform-O-Flex Stainless Braided Hose. For those who don't know, this is some of the highest quality stuff you can buy.

I'm selling them in 10" sections for those who would like to run a -12AN coolant line like myself. The actual hose needed is around 8", but I'd like to give you more than enough rather than just enough.

I only have this because I bought a 3' piece and only used a few inches of it for my own car!

I'm looking for $15 shipped/Paypal'd per 17" length of hose!


Oh, and a picture of the line you're getting:

http://i851.photobucket.com/albums/a...t/IMG_2841.jpg

Thanks!

Bump!

Bump it up.

Bump

I just bought a foot of this for 10 bucks so you might be hard pressed to sell at that price.

This line specifically is more than $10 a foot even if you buy it in large rolls. I also just realized that my description was wrong, too lol. I was going to give 18" sections for $15. Also, I'm not trying to make money, just trying to help out others who don't want to buy 3' only to use 8" like myself lol.

If someone needs it shoot me a PM and we can work on price.

If you need this stuff let me know. I'm not concerned about making money here, folks, just trying to help someone who needs the line.

Ill bite! $15 for 18"?

Yes sir!

Holy bump I don't want to look at this any more.

Still sitting here.

Could I use this for fuel?

This is what I'm using for the line before my fuel rail, sir. May be a bit big, though. I run -8an in the same brand/style.

OK. Here is my dumb question. Drum roll... Since yours is a bit tight, I cannot use these for fuel then, right? I would prefer to keep the stock dimensions, if possible unless I am making no sense at all. Someone rescue me. :crap:

I would like to have one of these for coolant as well. {thumbup}

The -12an is what I would use for the coolant line from radiator to thermostat housing. I was saying that I'm using this line in -8an size to connect the hard fuel feed line in the engine bay to the fuel rail.

Running a -12an line for fuel there would be too big!