Hello guys ,

I started to upgrade my Evolution 6 Tommi Makinen in novemeber 2017 which i bought to try to compete in the 457 meters roll race we have in our F1 track , the car power didnt meet my expectations of power and driving capabilities and got a buyer for the car for a good price as soon as its completely stock , The car made 703 AWHP & 517 tq on C16 didnt test the car on pump Gas .
Im removing all parts and selling the parts these parts are basically new after installing them just took it to the dyno and back to the garage and removing the parts , as you would say it was a waste of money and time .
Some parts photos are not available until the end of the week after i dissemble the engine and if you take 2 or more parts together i would give a better price than listed . Omarjanahi26@gmail.com

Price Drop on a couple of parts & Offers are Welcomed !


_ Precision 6466 Dual ball bearing ( SOLD )
_ AMS intake manifold ( Powder Coated ) $ 890 $850
_ Boomba Racing Throttle body 75mm $ 350 $325
_ Brian Crower Camshafts 276/276 $ 300 $275
_ Brian Crower Race single springs $ 300 $275
_ HKS Cam Gears $ 270 $250
_ HKS fine tunning belts 3pcs $ 160 $135
_ ATI Pulley Damper $ 370 $340
_ Competition Twin plate Clutch & flywheel $ 1100 $800
_ Kiggly HLA race pressure regulator ( SOLD )
_ ID 1700x fuel injectors $ 750 $700
_ AMS fuel rail $ 160 $140
_ GSC Race Balance shaft kit ( SOLD )
_ SSM coil pack $ 290 $250
_ Omni 4 bar map sensor ( SOLD )
_ Pro Racing Dual catch can with air filters $ 150
_ Summit Fuel Filter $ 55
_ AEM X Series Oil/Fuel pressure gauge (SOLD) ( white face available )
_ AEM X Series Oil/Fuel pressure gauge ( white face available ) $ 150
_ AEM Air / Fuel ratio gauge $ 155
_ Blitz Boost Controller $ 170
_ Haltech 1000 sport ECU $ 1000 $950
_ Nitto NT555R 245/45/17 new 4tires $ 400










_ AMS intake manifold ( Powder Coated )

https://cimg7.ibsrv.net/gimg/www.evo...40e1076f98.jpg

_ Boomba Racing Throttle body 75mm
https://cimg8.ibsrv.net/gimg/www.evo...d1541a90f5.jpg

_ Brian Crower Camshafts 276/276

_ Brian Crower Race single springs

_ HKS Cam Gears _ HKS fine tunning belts 3pcs
https://cimg5.ibsrv.net/gimg/www.evo...e436675d76.jpg



_ ATI Pulley Damper
https://cimg5.ibsrv.net/gimg/www.evo...5729328607.jpg

_ Competition Twin plate Clutch & flywheel
https://cimg0.ibsrv.net/gimg/www.evo...1dd3443f46.jpg




_ ID 1700x fuel injectors _ AMS fuel rail
https://cimg3.ibsrv.net/gimg/www.evo...26f957edc0.jpg




_ SSM coil pack
https://cimg2.ibsrv.net/gimg/www.evo...c9ad5e94ac.jpg

https://cimg4.ibsrv.net/gimg/www.evo...7bfce3bee2.jpg




_ Pro Racing Dual catch can with air filters
https://cimg7.ibsrv.net/gimg/www.evo...888de74271.jpg


_ Summit Fuel Filter

_ AEM X Series Oil/Fuel pressure gauge (SOLD) _ AEM X Series Oil/Fuel pressure gauge
https://cimg4.ibsrv.net/gimg/www.evo...5b7e5b1a84.jpg
https://cimg6.ibsrv.net/gimg/www.evo...d727734437.jpg

_ AEM Air / Fuel ratio gauge
https://cimg1.ibsrv.net/gimg/www.evo...ddf0fe2393.jpg

_ Blitz Boost Controller
https://cimg2.ibsrv.net/gimg/www.evo...cb2e053d52.jpg

_ Haltech 1000 sport ECU
https://cimg3.ibsrv.net/gimg/www.evo...cc2c52e918.jpg

_ Nitto NT555R 245/45/17 new 4tires

For Mitsubishi Evolution 6,7,8,9


DM for photos and prices Omarjanahi26@gmail.com

😅 no worries it’s going back to how she was

I will post the photos on Monday , Thanks

Interested in price on catch can setup and wideband also not pics of catch can setup!

PMs are not working, I’d gladly take th Kiggley HLA off your hands. Try to PM me so we can get this done, would need part shipped to USA however!!

Hello, what is the price of race Kiggly HLA pressure regulator and shipping costs 19720 ?

You pm doesn’t work.

please pm me the price of ATI Damper Pulley

ship to 93065


thanks

$130 shipped

$130 shipped