Dam ! I hope it isn't my GT30 kit?

Ryan - You have PM

 

Everybody relax, here is the scoop. I just got off the phone with precision turbo. They manufacture their own compressor housings and exhaust housings. The center section is garrett. Yes, i have a gt-35r HYBRID. It is not ported, which i ordered. You need to look on the compressor discharge nozzle, right where the hose would clamp on to. There will be an inscription on there. Its hard to see. Mine says gt-35 RLE. The "E" housing is 3" non ported inlet and the "R"(I think) is a 4" inlet ported. There are none available till march. They said to send it to them and they would take care of me. FREE. Nothing suprises me anymore.....I might just start making turbo kits myself....My machine shop has been mothballed for 3 years....or maybe if certain shops get too busy, i could do overload work for them....Hell, ide even work for parts.....Ryan, Dave hello?????

 

Guys, please don't jump all over things you don't know about.


The turbo Ray received in the pics is a GT35R w/T04E cover. It is a Garrett GT series turbo from Precision. Again if you don't know what you asre looking at then please don't make stupid assumptions.

 

The 4"ported shrouds are backordered at this time, but you will receive it when they become available.

 

Intersting. I have never seen a GT35R w/ a .60 A/R compressor side. That is why I assumed it is a GT30R. I will retract my comment.

 

It's the stand TO4E cover from Precision. All tracking numbers will be PMed to you guys today. Thanks Ryan

 

Ryan, are there any installation photos or instructions?? Mainly hose routing. Not in a hurry because ill be waiting for the ported shroud. Ray

 

There are several pics of the kit installed I can email you. The hose routing is also pretty simple and we can discuss that over the phone.



Zach, if you can email me I will send you over an invoice.

 

Well, i started to mount the manifold to the turbo assembly. Of course, it dont fit. The Tial does not even come close to lining up with the tube from the manifold. Now what...... Ryan, i want a refund. Nuff said.......credit back my card and i will properly package and send it back at my expense. Ime sure you have people waiting. I cant even enjoy my car anymore because of this whole ordeal.

 

Give me a call. There is a proper way to install the assembly. I will explain it to you.

 

Not interested. Refund the card or YOU get to deal with the wife. Her *****ing and your BS puts this project in the trash can. This GODDAM fiasco is over......(proper way my A$$. The only way this will fit is by using 3 to 4 copper shims/gasgets to raise the valve to align with the holes) You miss-jigged it or the manifold.

 

Please call. There is something you are doing wrong and I can explain it to you.

 

there should be no reason why you cant explain it to me here.......ime sure the others will need to know as well, or am i the only one???

 

Can you call me so I can walk you through it. All of the other kits we shipped are external dumps so it wouldn't matter.

 

wow!!!!! just wow!!! sounds familiar............