Notices
For Sale/WTB - Engine / Drivetrain / Power Includes exhausts, cams, clutches, flywheels and all other power related components.
Mark this thread as Unsold

Lancer Ralliart Catback exhaust

Thread Tools
 
Search this Thread
 
Old Jul 15, 2006 | 06:41 PM
  #1  
MitsuJoe's Avatar
Thread Starter
Former Sponsor
iTrader: (133)
 
Joined: Dec 2003
Posts: 3,123
Likes: 0
From: Anywhere
Lancer Ralliart Catback exhaust

This is a custom made catback for the Lancer Ralliart. Reason it was removed is because the wife wanted a more stock appearing reasonable system.

It is 2.5" pressbent aluminized steel. It has a RRE resonator with a Ebay Apexi style muffler. For you to make this work on your car you will need 4 - nuts, bolts, crush washers, 2 - 2.5" exhaust gaskets, and have the part that was cut welded. It is your option although you could use a band clamp here instead of getting it welded. The reason it was cut here was so I could ship it easier.

The exhaust was noticeable over stock. It performed good and should hold up well. As for mounting it utilizes 2 of 3 stock mounts. The exhaust won't hit the rear suspension if you have it adjusted right. The Kartboy mounts helped make it more solid. If you don't like the muffler it should be easy for any exhaust shop to put on another one. The muffler does come with an insert to quiet it down although we never used it.

I would like $200 plus shipping.

EBAY LINK: http://cgi.ebay.com/ebaymotors/ws/eB...m=130010992425

Attached Thumbnails Lancer Ralliart Catback exhaust-100_0116.jpg   Lancer Ralliart Catback exhaust-100_0528.jpg   Lancer Ralliart Catback exhaust-100_0529.jpg   Lancer Ralliart Catback exhaust-100_0530.jpg   Lancer Ralliart Catback exhaust-100_0531.jpg  


Last edited by MitsuJoe; Jul 25, 2006 at 11:50 PM. Reason: Added Ebay Auction
Old Jul 16, 2006 | 09:27 AM
  #2  
bruce988jl's Avatar
Evolved Member
iTrader: (56)
 
Joined: Jun 2004
Posts: 2,568
Likes: 1
From: Boston, MA
Bump for a good guy!! Good luck selling bro.
Old Jul 17, 2006 | 08:31 PM
  #3  
MitsuJoe's Avatar
Thread Starter
Former Sponsor
iTrader: (133)
 
Joined: Dec 2003
Posts: 3,123
Likes: 0
From: Anywhere
Also included are 4 - 2.5" 45 degree Mandrel bends for FREE. The price is the same and you get more!
Old Jul 18, 2006 | 12:45 PM
  #4  
bruce988jl's Avatar
Evolved Member
iTrader: (56)
 
Joined: Jun 2004
Posts: 2,568
Likes: 1
From: Boston, MA
what do you do with the mandrel bends?

bump
Old Jul 18, 2006 | 12:48 PM
  #5  
MitsuJoe's Avatar
Thread Starter
Former Sponsor
iTrader: (133)
 
Joined: Dec 2003
Posts: 3,123
Likes: 0
From: Anywhere
If you ever want to uipgrade to the mandrel bends you will have the. It is not a requirement.
Old Jul 19, 2006 | 08:03 AM
  #6  
DangerousDan's Avatar
Evolved Member
iTrader: (8)
 
Joined: Aug 2005
Posts: 4,015
Likes: 0
From: Charlotte, NC
You have a PM Joe.
Old Jul 19, 2006 | 06:43 PM
  #7  
MitsuJoe's Avatar
Thread Starter
Former Sponsor
iTrader: (133)
 
Joined: Dec 2003
Posts: 3,123
Likes: 0
From: Anywhere
I never got this PM.
Old Jul 19, 2006 | 07:18 PM
  #8  
DangerousDan's Avatar
Evolved Member
iTrader: (8)
 
Joined: Aug 2005
Posts: 4,015
Likes: 0
From: Charlotte, NC
sending it again then. Damnit
Old Jul 21, 2006 | 07:27 AM
  #9  
DangerousDan's Avatar
Evolved Member
iTrader: (8)
 
Joined: Aug 2005
Posts: 4,015
Likes: 0
From: Charlotte, NC
did you get the pm Joe? Haven't heard back from you, thats all.
Old Jul 21, 2006 | 07:38 AM
  #10  
MitsuJoe's Avatar
Thread Starter
Former Sponsor
iTrader: (133)
 
Joined: Dec 2003
Posts: 3,123
Likes: 0
From: Anywhere
Pm sent back.
Old Jul 21, 2006 | 08:09 AM
  #11  
MitsuJoe's Avatar
Thread Starter
Former Sponsor
iTrader: (133)
 
Joined: Dec 2003
Posts: 3,123
Likes: 0
From: Anywhere
I will consider offers, including possible trades.
Old Jul 23, 2006 | 06:10 PM
  #12  
MitsuJoe's Avatar
Thread Starter
Former Sponsor
iTrader: (133)
 
Joined: Dec 2003
Posts: 3,123
Likes: 0
From: Anywhere
ttt
Old Jul 24, 2006 | 08:55 PM
  #13  
DangerousDan's Avatar
Evolved Member
iTrader: (8)
 
Joined: Aug 2005
Posts: 4,015
Likes: 0
From: Charlotte, NC
Did you get my PM Joe?
Old Jul 24, 2006 | 08:58 PM
  #14  
MitsuJoe's Avatar
Thread Starter
Former Sponsor
iTrader: (133)
 
Joined: Dec 2003
Posts: 3,123
Likes: 0
From: Anywhere
The wife wants me to hold out for another week to see if a cash buyer is interested. I honestly don't know why it hasn't sold. I have had PM's about it although nothing serious. Maybe my description is too detailed.
Old Jul 24, 2006 | 09:01 PM
  #15  
DangerousDan's Avatar
Evolved Member
iTrader: (8)
 
Joined: Aug 2005
Posts: 4,015
Likes: 0
From: Charlotte, NC
just sent another PM, didn't expect you to respond so quickly here that's cool man, now I know what is going on anyway.



All times are GMT -7. The time now is 11:48 PM.