Notices
Evo Dyno Tuning / Results Discuss vendor and member dyno tuning techniques, results and graphs.

Evo 3.5 (Mirage) Dyno, making Jam on the heartbreaker!

Thread Tools
 
Search this Thread
 
Old Apr 20, 2018, 08:21 AM
  #1  
Newbie
Thread Starter
 
coltboostin's Avatar
 
Join Date: Aug 2007
Location: Cleveland
Posts: 6
Likes: 0
Received 1 Like on 1 Post
Evo 3.5 (Mirage) Dyno, making Jam on the heartbreaker!

This is a 95 Mirage. AWD swapped - built using all used or fab'd parts. A bunch of junk really! Last year we made 670whp on this dyno and rolled out to a 10.0@156mph
Now we are getting into Big Powa. 40ish PSI conservative timing net 770awhp. Pump E75. On eagle rods and 95% IDC, we called it good for now. 670whp on this dyno was good for 156mph, so we will see what happens. My only goal was 9.9@160+ hopefully I have that covered.


https://www.youtube.com/watch?v=4BY-...ature=youtu.be

It may not "make 900whp" but it will likley be faster than a lot of guys "making 900whp"



Looking forward to 2018!
Old Apr 20, 2018, 08:38 AM
  #2  
Evolved Member
 
Evo8cy's Avatar
 
Join Date: Nov 2014
Location: Cyprus
Posts: 563
Likes: 0
Received 39 Likes on 37 Posts
What you call junk because you salvaged it and it is used, was once brand new, and since these parts retain the same level of functionality then they are not different than they used to be brand new really, minor cosmetic differences.

Over here we've been doing conversions like that since the early 90s, gallant vr4, colt, evo 1,2,3 etc.

Good power on a mustang All the best with the setup.






Marios

Last edited by Evo8cy; Apr 20, 2018 at 08:50 AM. Reason: typo
Old Apr 20, 2018, 09:25 AM
  #3  
Evolved Member
iTrader: (8)
 
IzzyRS's Avatar
 
Join Date: Aug 2011
Location: Us
Posts: 818
Received 22 Likes on 22 Posts
Making those Eagle rods work! More pictures of the car, please.
Old Apr 20, 2018, 10:04 AM
  #4  
Newbie
Thread Starter
 
coltboostin's Avatar
 
Join Date: Aug 2007
Location: Cleveland
Posts: 6
Likes: 0
Received 1 Like on 1 Post
Originally Posted by Evo8cy
What you call junk because you salvaged it and it is used, was once brand new, and since these parts retain the same level of functionality then they are not different than they used to be brand new really, minor cosmetic differences.
Over here we've been doing conversions like that since the early 90s, gallant vr4, colt, evo 1,2,3 etc.
Good power on a mustang All the best with the setup
Marios
Ha! One mans trash!

Originally Posted by IzzyRS
Making those Eagle rods work! More pictures of the car, please.
Not much to look at! Current set up.




With the slicks on

The following users liked this post:
Evo2372 (May 20, 2018)
Old Apr 20, 2018, 10:05 AM
  #5  
Newbie
Thread Starter
 
coltboostin's Avatar
 
Join Date: Aug 2007
Location: Cleveland
Posts: 6
Likes: 0
Received 1 Like on 1 Post
video of last years pass- just rolling out.
Old Apr 20, 2018, 12:45 PM
  #6  
Evolved Member
 
Evo8cy's Avatar
 
Join Date: Nov 2014
Location: Cyprus
Posts: 563
Likes: 0
Received 39 Likes on 37 Posts
Originally Posted by coltboostin
Ha! One mans trash!


As there two interpretations to what you've said. What is trash about my comment? Unless you meant that the setup is a one man's trash, which in this case I agree, it's just a one man's trash.








Marios
Old Apr 20, 2018, 12:55 PM
  #7  
EvoM Staff Alumni
iTrader: (3)
 
MinusPrevious's Avatar
 
Join Date: May 2008
Location: So.Cal
Posts: 7,704
Received 1,384 Likes on 1,317 Posts
Theres a small group of us that refer to our EvOs as "Junk Boxes" / "Poor mans Porsche"

Its all about having a sense of perspective & humor

Hey, good to have you back on the forum Marios
Old Apr 20, 2018, 01:00 PM
  #8  
Evolved Member
 
Evo8cy's Avatar
 
Join Date: Nov 2014
Location: Cyprus
Posts: 563
Likes: 0
Received 39 Likes on 37 Posts
Originally Posted by MinusPrevious
Theres a small group of us that refer to our EvOs as "Junk Boxes" / "Poor mans Porsche"

Its all about having a sense of perspective & humor

Hence why I said that I do agree if by what he said he meant the second, as I do share the same perspective myself, but not being from the States I simply wanted to make sure of that.








Marios
Old Apr 24, 2018, 08:45 AM
  #9  
Newbie
Thread Starter
 
coltboostin's Avatar
 
Join Date: Aug 2007
Location: Cleveland
Posts: 6
Likes: 0
Received 1 Like on 1 Post
Touchy Touchy!


So who wants to race?
Old Apr 25, 2018, 05:20 AM
  #10  
Evolved Member
 
Jonno99's Avatar
 
Join Date: Aug 2014
Location: Australia
Posts: 1,382
Received 68 Likes on 64 Posts
Anything under 1000hp is just junk in the States
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
franksevo
EvoM New Member / FAQs / EvoM Rules
18
Oct 30, 2009 08:25 AM
Jackson Machine
Vendor Announcements
3
Jun 5, 2009 04:49 AM
DS-03evo
Evo Engine / Turbo / Drivetrain
34
Oct 7, 2007 06:55 AM
Evoposer
Lancer General
23
Jun 27, 2002 06:58 PM



Quick Reply: Evo 3.5 (Mirage) Dyno, making Jam on the heartbreaker!



All times are GMT -7. The time now is 02:18 AM.