Help with expected power results
#1
Newbie
Thread Starter
Help with expected power results
I'm currently on my break-in tune and I am wanting to get some opinions/estimates on how much i could make so i can make some final decisions. And also the gain of an intake manifold with my supporting mods(because i currently have stock intake man and TB.) My tuner said with my current setup it should be over 500. He isn't getting on it in the video and reached 7000 rpm and 360AWHP, 277TQ. Tuned by DBW. Thanks!
mods:
HKS TB Exhaust
SD 4" intake
AMS Fuel rail
1000cc injectors
fuel pump 255 walboro
GT35R turbo kit w/ ams manifold
3.5” wide tank ETS FMIC
eagle rods
ross pistons(.030) bored 8:8:1
272/278 hks cams
BC springs and retainers
BC 1mm oversized valves
Acl bearings
Ported head
Shepard trans 5-speed
MBC
act clutch
mods:
HKS TB Exhaust
SD 4" intake
AMS Fuel rail
1000cc injectors
fuel pump 255 walboro
GT35R turbo kit w/ ams manifold
3.5” wide tank ETS FMIC
eagle rods
ross pistons(.030) bored 8:8:1
272/278 hks cams
BC springs and retainers
BC 1mm oversized valves
Acl bearings
Ported head
Shepard trans 5-speed
MBC
act clutch
The following users liked this post:
Flyhigh (Mar 17, 2019)
#5
Newbie
Thread Starter
I will post up the dyno video when i get the final tune so you'll know. Yea I know the inj. will not work with E-85, i just bought these a while back so I want to keep this build for now. I plan on getting IM, E-85 kit later. Probably around 2000cc injectors.
The following users liked this post:
MinusPrevious (Mar 17, 2019)
Trending Topics
#11
Evolving Member
iTrader: (22)
I'm currently on my break-in tune and I am wanting to get some opinions/estimates on how much i could make so i can make some final decisions. And also the gain of an intake manifold with my supporting mods(because i currently have stock intake man and TB.) My tuner said with my current setup it should be over 500. He isn't getting on it in the video and reached 7000 rpm and 360AWHP, 277TQ. Tuned by DBW. Thanks!
mods:
HKS TB Exhaust
SD 4" intake
AMS Fuel rail
1000cc injectors
fuel pump 255 walboro
GT35R turbo kit w/ ams manifold
3.5” wide tank ETS FMIC
eagle rods
ross pistons(.030) bored 8:8:1
272/278 hks cams
BC springs and retainers
BC 1mm oversized valves
Acl bearings
Ported head
Shepard trans 5-speed
MBC
act clutch
mods:
HKS TB Exhaust
SD 4" intake
AMS Fuel rail
1000cc injectors
fuel pump 255 walboro
GT35R turbo kit w/ ams manifold
3.5” wide tank ETS FMIC
eagle rods
ross pistons(.030) bored 8:8:1
272/278 hks cams
BC springs and retainers
BC 1mm oversized valves
Acl bearings
Ported head
Shepard trans 5-speed
MBC
act clutch
The following users liked this post:
Flyhigh (Mar 23, 2019)
#12
Newbie
Thread Starter
Thanks I don't know what the revised cams are but all i know is i bought theses cams around 2011 so they really outdated. I hear a lot about the GSC cams and when i decided to go E-85 im going to purchase the S2's and Magnus V5.