![]() |
Any Ft. Riley Evo's?
Just wondering if there is anybody out there. I'll be heading that way sometime in the next week or so.
Thanks Steve |
Hey steve, I just purchased my EVO8 and I'll be at Ft Riley in September. How is the scene there ?
|
Well if you are into AutoX there is a local SCCA group in Salina. About 1hr away. once a month solo cross. I havent gone yet but plan to go. this sunday they had the yearly event at riley on the airfield. There are lots of evo's here to my surprise, but notbody posts up on here from what i can see.
|
Good to hear it Steve, Do you self tune or by chance is there any place that knows a bit about evo tuning around? Dyno? I'm on an e8 tune currently, I heard there is e85 somewhere on post?
|
Originally Posted by 68wsteve
(Post 9374282)
Well if you are into AutoX there is a local SCCA group in Salina. About 1hr away. once a month solo cross. I havent gone yet but plan to go. this sunday they had the yearly event at riley on the airfield. There are lots of evo's here to my surprise, but notbody posts up on here from what i can see.
Back when I was there from '01-'04 there was a HUGE ricer scene. HUGE. Not sure what's it's turned into now... you should check out the parking lot by Salvation Army in JC at night. |
bump. Two months until I'll be around the area.
|
I'm at Riley... we'll be back from deployment in a couple of months. I'm rockin a 500+whp silver, wingless evo 8. there are quite a few Evo's and Sti's floatin around there
|
Do you Self tune Toole? I'll be satisfied with numbers like that, what is your setup?
|
Originally Posted by marcusE
(Post 9499609)
Do you Self tune Toole? I'll be satisfied with numbers like that, what is your setup?
Power mods: TiTek o2 housing BR 3" dp BR 3" catback GSC S2 cams GSC valve springs FP Red ETS u/l intercooler pipes TurboXS I/C TurboXS BOV (recirc) GSC zero-tick lifters FP 84mm intake Walbro 255 PTE 1000cc injectors Exedy twin disk to hold the power and a few other little odds and ends Tune is going to be for E85 around 32psi on a 91oct tune i'm hoping for around 440'ish whp around 25psi |
Originally Posted by Toole
(Post 9499944)
I do not tune... My friend Fathouse (on here) will be doing the tuning
Power mods: TiTek o2 housing BR 3" dp BR 3" catback GSC S2 cams GSC valve springs FP Red ETS u/l intercooler pipes TurboXS I/C TurboXS BOV (recirc) GSC zero-tick lifters FP 84mm intake Walbro 255 PTE 1000cc injectors Exedy twin disk to hold the power and a few other little odds and ends Tune is going to be for E85 around 32psi on a 91oct tune i'm hoping for around 440'ish whp around 25psi |
Originally Posted by marcusE
(Post 9501476)
Sounds healthy. Will you be tuning in Kansas? It'd be nice to know that there are guys that know exactly what they are doing around the area. I'm new to it but am venturing out to learn anyway.
|
Yep, going to stick with Mellon for sure.
|
| All times are GMT -7. The time now is 02:30 PM. |
© 2026 MH Sub I, LLC dba Internet Brands