|
TTP-Engineering's HIAG 2400cc injectors!
http://i4.photobucket.com/albums/y11...ttp_2200cc.jpg
TTP-Engineering is proud to release our HIAG 2400cc injectors for Evo 8-9 and X! With limited flow rates on standard injectors and low load hiccups plaguing the industry with regards to running larger sized injectors we are proud to be able to bring another option to the table with regards to a ultra high flowing injector able to support 1200hp. With these high impedance injectors the hiccups of the past should be eliminated and driveability should be much improved all the while being able to support gasoline and ethanol content to 100%. These are not recommended for VP Import or C16 as the seals can swell, reducing efficiency, however gasoline and ethanol are supported. Injector sets are flow matched to within 0.48% of each other to insure precision fueling for each cylinder. Questions and install instructions are available by email sales@ ttp-engineering.com. Thanks for looking! TTP |
I think the obvious question is, how much will these be. Since BR just release something similar and are in the range of $260 ea. Curious to see what your going to charge for these High Flowing Injectors.
|
Originally Posted by mdsevo06
(Post 7656743)
I think the obvious question is, how much will these be. Since BR just release something similar and are in the range of $260 ea. Curious to see what your going to charge for these High Flowing Injectors.
|
how much shipped for a evo x pm me
|
Originally Posted by Evo a Mula
(Post 7657090)
how much shipped for a evo x pm me
http://ttp-engineering.com/catalog/p...roducts_id=437 |
Installed our test set today. Driveability is EXCELLENT!
Tested on our project Evo X. http://i4.photobucket.com/albums/y11...g_install2.jpg |
PM for pricing and order details.
Thanks!! |
Are these what you use on your 1500 MD-WHP 8 Second Shop Evo? If so, I'll take 8.
|
very niiice Scotty... bump for you
|
Originally Posted by Pure Playaer
(Post 7702474)
Are these what you use on your 1500 MD-WHP 8 Second Shop Evo? If so, I'll take 8.
http://i4.photobucket.com/albums/y11...ynojet_TTP.jpg |
PM for pricing and order instructions.
Thanks!! |
pmd and emailed scott today...i need to set up an apointment with you
and good times at the track last nite great music haha |
PM for pricing and details. Call me directly for appointments!! Thanks!!
Originally Posted by TTP Engineering
(Post 7656709)
http://i4.photobucket.com/albums/y11...ttp_2200cc.jpg
TTP-Engineering is proud to release our HIAG 2400cc injectors for Evo 8-9 and X! With limited flow rates on standard injectors and low load hiccups plaguing the industry with regards to running larger sized injectors we are proud to be able to bring another option to the table with regards to a ultra high flowing injector able to support 1200hp. With these high impedance injectors the hiccups of the past should be eliminated and driveability should be much improved all the while being able to support gasoline and ethanol content to 100%. These are not recommended for VP Import or C16 as the seals can swell, reducing efficiency, however gasoline and ethanol are supported. Injector sets are flow matched to within 0.48% of each other to insure precision fueling for each cylinder. Questions and install instructions are available by email sales@ ttp-engineering.com. Thanks for looking! TTP |
PM for pricing and details.
Have an amazing weekend. Thanks!! |
PM for pricing and details, Thanks!!
Originally Posted by TTP Engineering
(Post 7656709)
http://i4.photobucket.com/albums/y11...ttp_2200cc.jpg
TTP-Engineering is proud to release our HIAG 2400cc injectors for Evo 8-9 and X! With limited flow rates on standard injectors and low load hiccups plaguing the industry with regards to running larger sized injectors we are proud to be able to bring another option to the table with regards to a ultra high flowing injector able to support 1200hp. With these high impedance injectors the hiccups of the past should be eliminated and driveability should be much improved all the while being able to support gasoline and ethanol content to 100%. These are not recommended for VP Import or C16 as the seals can swell, reducing efficiency, however gasoline and ethanol are supported. Injector sets are flow matched to within 0.48% of each other to insure precision fueling for each cylinder. Questions and install instructions are available by email sales@ ttp-engineering.com. Thanks for looking! TTP |
| All times are GMT -7. The time now is 07:19 PM. |
© 2026 MH Sub I, LLC dba Internet Brands