EvolutionM - Mitsubishi Lancer and Lancer Evolution Community

Now made exclusively with Russell ProClassic nylon hose. It's MUCH easier to work with, extremely lightweight and it will not scratch paint. Includes a -10AN Fuelab Regulator, and all fittings to make this kit safe for E85, race gas and methanol.

http://www.streettunedmotorsports.co...proclassic.jpg

Our STM Fuel Return Kit for the Evo VIII-IX includes all fittings, hardware and line for your fuel rail to -10AN Fuelab Regulator (your choice of color) and back to the return line.

Comprised of all anodized components, these fuel kits are safe for all types of fuel including race gas, methanol and E85.

We offer this kit with a -10AN inlet and -6AN outlet regulator so if you decide to step up your fuel system in the future, you'll need only to upgrade the lines and fittings. Contact us to upgrade to -8 or a -10 kit.

We used to offer this kit in stainless and pushlock, but after working with the ProClassic nylon hose, there just is no comparison. This Nylon braided line is black with blue flecks throughout and is MUCH easier to work with, extremely lightweight and it will not scratch paint like the stainless will.

(Assembly required.)

Features:
- 3 feet -6AN ProClassic Braided Nylon hose (You cut into 2 sections of desired length)
- High Quality Anodized Fittings (E85, Methanol & Race Gas safe)
- Fuelab Fuel Pressure Regulator (Your choice of color)
- Liquid-Filled Fuel Pressure Gauge (0-100 psi)

http://www.streettunedmotorsports.co...roclassic2.jpg

The color regulators we offer with this kit.
http://www.streettunedmotorsports.co...fpr_colors.jpg

These can be found here http://www.streettunedmotorsports.com/evo/evo_fuel.htm

As always, Thank you for your support!

-STM