Great international service from MAP
#1
Newbie
Thread Starter
Join Date: Sep 2008
Location: Australia
Posts: 79
Likes: 0
Received 0 Likes
on
0 Posts
Great international service from MAP
Hi everybody! Name is Charlie and I am from Australia. I have been in the evo scene for approximately 3 years now. I have dealt with mainly Australian, Japanese and USA dealers. All i can say is, I have been dealing from Adam Brunson from MA Performance for the last month or so and what can I say... His customer service AND products ***** all over any other dealer I have dealt with.
His parts arrive faster from the US to my front door steps compared to a package from another state in Australia!!
His replies to my emails, even though from a completely different time zone are faster than dealers in the same country as myself.
Not only that, but he backs up his products and explains to me what I need and what i dont need.
Definitely has me as a life time customer!!
What I have purchased from Adam recently:
Wiseco 10.0CR Pistons with rings
MAP HD billet I beam rods
ACL bearings
King thrust bearings
ARP main studs
MAP H11 headstuds x 2 (got a set for a friend of mine as well)
OEM gasket kit
Balance shaft delete kit with new OEM bearings
Gates Timing belt kit (with bearings and tensioner)
Evo 8 water pump
FIC 2150cc injectors
Competition 6 puck clutch with HD pressure plate
Competition clutch lightened flywheel
ARP extended wheel studs x 4
I think that is all i purchased, I may have left a few things out, going off the top of my head hehe
Here is a picture of some of the items that arrived.
MAP FTW!
His parts arrive faster from the US to my front door steps compared to a package from another state in Australia!!
His replies to my emails, even though from a completely different time zone are faster than dealers in the same country as myself.
Not only that, but he backs up his products and explains to me what I need and what i dont need.
Definitely has me as a life time customer!!
What I have purchased from Adam recently:
Wiseco 10.0CR Pistons with rings
MAP HD billet I beam rods
ACL bearings
King thrust bearings
ARP main studs
MAP H11 headstuds x 2 (got a set for a friend of mine as well)
OEM gasket kit
Balance shaft delete kit with new OEM bearings
Gates Timing belt kit (with bearings and tensioner)
Evo 8 water pump
FIC 2150cc injectors
Competition 6 puck clutch with HD pressure plate
Competition clutch lightened flywheel
ARP extended wheel studs x 4
I think that is all i purchased, I may have left a few things out, going off the top of my head hehe
Here is a picture of some of the items that arrived.
MAP FTW!
#3
Evolved Member
I may shop around but I'll always price check with MAP and try to buy from them (usually they've got the best price anyhow).
one time I ordered mismatched gauges (one clear, one tinted) from them. they noticed the same day, knew it didn't make sense, and emailed me asking if was sure that's what I wanted! People that care and THINK! then they explained to me how to check what I already had to help me match them to that.
my recent build went quite smoothly in part due to the fact that everything I ordered from MAP was as described and exactly correct for my application. When you're stressing about whether you're making the right decisions, buying the right parts, etc. knowing MAPs solutions are 100% vetted for your Evo is a big relief.
one time I ordered mismatched gauges (one clear, one tinted) from them. they noticed the same day, knew it didn't make sense, and emailed me asking if was sure that's what I wanted! People that care and THINK! then they explained to me how to check what I already had to help me match them to that.
my recent build went quite smoothly in part due to the fact that everything I ordered from MAP was as described and exactly correct for my application. When you're stressing about whether you're making the right decisions, buying the right parts, etc. knowing MAPs solutions are 100% vetted for your Evo is a big relief.