Dyno results...just thought I'd show them.
Thread Starter
Evolving Member
Joined: Nov 2004
Posts: 299
Likes: 0
From: Southern Cali
Dyno results...just thought I'd show them.
TQ is to the FLYWHEEL.
The chart represents the torque from the flywheel. They added a correction factor of 17% to compensate for the lose in power as it goes through the transmission and transfer case. The wheels were removed and the dyno pods attached directly to the hubs. Here is the dyno chart. 314.7HP and 384TQ with the following setup on 91 octane:
3"AVO Exhaust with RRE cat
3"AVO downpipe
Vishnu Xflash
HKS 264/264 cams
Vishnu Cam Gears
255 Walbro fuel pump
MR BOV
The chart represents the torque from the flywheel. They added a correction factor of 17% to compensate for the lose in power as it goes through the transmission and transfer case. The wheels were removed and the dyno pods attached directly to the hubs. Here is the dyno chart. 314.7HP and 384TQ with the following setup on 91 octane:
3"AVO Exhaust with RRE cat
3"AVO downpipe
Vishnu Xflash
HKS 264/264 cams
Vishnu Cam Gears
255 Walbro fuel pump
MR BOV
Last edited by Ztypestock8; May 18, 2005 at 10:31 PM.
Thread Starter
Evolving Member
Joined: Nov 2004
Posts: 299
Likes: 0
From: Southern Cali
I finaly got the video of my dyno run. Right click and save as (kinda big)
http://wavmixer.com/evo/video/CarlosDyno.MPG
http://wavmixer.com/evo/video/CarlosDyno.MPG
