Well I had mentioned in my other thread that I was having problems with my ZAVT always going off. I thought I had it figured out but I was wrong. Heres the deal.

I have it wired in just how the diagram said, with the red going to the 12v power, the white going to the relay white, the blue goes to the ZT-2 blue, and the black goes to a ground. I have the power for the ZAVT, the relay, and the ZT-2 all going to the ignition wire, pin #82 on my VIII.

Well I thought I had the problem fixed as when I had the ignition turned to the acc. position it wasn't going off. However, once I turn the car on it goes on again. Heres what Ive done:

1 turned all the warnings off in my laptop, still goes off
2 disconnected the white wire, still goes off
3 disconnected the blue wire, still goes off
4 disconnected the ground, still goes off

What else could it be? With only the red wire connected it still goes off.