Evo 9 meth help
#1
Newbie
Thread Starter
iTrader: (1)
Join Date: Jan 2014
Location: nnj
Posts: 76
Likes: 0
Received 0 Likes
on
0 Posts
Evo 9 meth help
Hey guys have a few questions reguarding using meth. I dont have e85 in my area so i have a meth kit imma going to run in my evo 9. My mods are ported polished exhaust manifold and intake manifold. Full TBE airfuel ratio meter ets upper and lower intercooler gonna get 70mm tb and plate for intake manifold. Ets cold air intake walbro fuel pump. Aem meth controller with low level sensor and sight. Imma alsor running a manual boost controller. Now from what i have read i will need bigger fuel injectors what would anyone recommend i was looking at 880s or 1000s as i was going to maybe upgrade my turbo to an fp green. With no turbo upgrade i was looking to hit 400 hp. What size jet should i run with this setup. I am using stock evo 9 cams any help would be great
#6
Evolved Member
iTrader: (9)
The only way to know if you need more injector would be to log AFR vs idc, airflow, ipw.
For instance, I have been running stock injectors with methanol inj since 2006, eng is still stock with 160k miles. BBK full turbo was installed 2007. The only time it ran out of fuel was when too much water was used. The alcohol system does consist of 2 pumps and 3 nozzles
For instance, I have been running stock injectors with methanol inj since 2006, eng is still stock with 160k miles. BBK full turbo was installed 2007. The only time it ran out of fuel was when too much water was used. The alcohol system does consist of 2 pumps and 3 nozzles
Thread
Thread Starter
Forum
Replies
Last Post
tscompusa
Evo Dyno Tuning / Results
8
Jun 21, 2014 12:02 PM
blackonblackevo
Water / Methanol Injection / Nitrous Oxide
6
Apr 24, 2008 09:07 AM
evilevo2006
Evo Engine / Turbo / Drivetrain
20
Jul 2, 2007 01:41 PM
dp2580
For Sale/WTB - Engine / Drivetrain / Power
21
Feb 28, 2007 01:10 PM