Super Size It! - Aquamist HFS-5 Milo style
Helped my buddy Milo install his aquamist hfs-5 kit, with triple 6 quart tanks. He will not have to fill up for quite a while...so here it is, the 1st official triple tank installation on a Evo IX. Here in Texas, everything is BIGGER {thumbup}
http://img2.putfile.com/thumb/8/23800544954.jpg http://img2.putfile.com/thumb/8/23800545093.jpg http://img2.putfile.com/thumb/8/23800545038.jpg http://img2.putfile.com/thumb/8/23800545097.jpg http://img2.putfile.com/thumb/8/23800545060.jpg http://img2.putfile.com/thumb/8/23101191013.jpg http://img2.putfile.com/thumb/8/23101191060.jpg http://img2.putfile.com/thumb/8/23101190998.jpg http://img2.putfile.com/thumb/8/23101190963.jpg http://img2.putfile.com/thumb/8/23101190983.jpg http://img2.putfile.com/thumb/8/23101190969.jpg http://img2.putfile.com/thumb/8/23101191040.jpg http://img2.putfile.com/thumb/8/23101190957.jpg |
damn dude...you got me beat - 6 injectors, 4 fuel tanks and 2 fuel pumps :lol:
|
So nice!:D
Hopefully by the end of this week, I can finish installing the GSC S1 cams, Boost Logics T61 turbo upgrade and the HSF-5. Now, I just need to find a good tuner for my AEM EMS, this time around:p Thanks Slowcar for you help:beer: |
All I can say is wow, you can go the year without refilling, haha. No, jk, you'd be surprised how quickly the methanol goes while consistantly getting on it. But god it's fun {thumbup}
|
hes going to run 75meth/25water, thats a savings of 25% meth :lol:
i want to be there to see/hear when this bad puppy gets tuned {thumbup} |
wouldn't it be easier to just get a fuel cell :)
|
:lol: that will be too easy
most fuel cells take up real estate - these flambeau tanks mount flush to the back of the seats you doing fuel cell in your setup? :beer: |
nope, i'm sticking with one tank. i'm gonna try to hide it though... wont know till i get the car out of my garage first, then i can start on the meth install :)
|
:beer:
when you get done, we should have a TX Aquamist Evo gtg :D |
Originally Posted by SlowCar
(Post 4659323)
:beer:
when you get done, we should have a TX Aquamist Evo gtg :D |
:drink:
|
Originally Posted by milo
(Post 4658910)
Aquamist HSF-5 Super Size
https://www.evolutionm.net/forums/sh...d.php?t=290368 |
How are you planning on connecting the tanks or running meth to the pump? Im trying to figure out how I am going to run my tanks/pump to avoid pump starvation. It would be best for all the tanks to be hooked to each other and then have one outlet to the pump but thats not the way aquamist reccomends. They reccomend putting the t fitting right in the first pump and the running one line to the pump and the other to the other tank...
|
you know, i havent thought of it yet.....
i'll prolly tie all the 3 tanks together on a common rail/manifold then "T" it off to the 100u filter then the pump. |
Let me know what parts you are planning to use for that as I am interested. Currently I have 3 tanks myself and I have no clue what the hell I am going to do with them. haha
|
:lol:
its blind leading the blind :lol: eventually you know it will turn out excellent {thumbup} :beer: |
Im not contesting that and thats for certain. The weird thing for me is all 3 of my tanks are different. Maybe I should just take this to pm because I don't want to thread jack.
|
Originally Posted by Boltz.
(Post 4659614)
How are you planning on connecting the tanks or running meth to the pump? Im trying to figure out how I am going to run my tanks/pump to avoid pump starvation. It would be best for all the tanks to be hooked to each other and then have one outlet to the pump but thats not the way aquamist reccomends. They reccomend putting the t fitting right in the first pump and the running one line to the pump and the other to the other tank...
|
Hey I'm an atx evo member and you told me to F off!
|
:lol:
|
Originally Posted by dzraduzit
(Post 4660722)
Hey I'm an atx evo member and you told me to F off!
Your an official BoostLogic FMIC Kit member.:thumbup: Congrads in your purchase, can't wait to help you install it this weekend.:mitsu: |
http://www.aquamist.co.uk/forum/gallery/abner/3T.jpg
With each filled, it should last at least 100 years. Putting a pump in might speed up the consumption a bit. If you stagger the flanges, you might just fit four tanks in the same space? |
Originally Posted by Richard L
(Post 4661187)
http://www.aquamist.co.uk/forum/gallery/abner/3T.jpg
With each filled, it should last at least 100 years. Putting a pump in might speed up the consumption a bit. If you stagger the flanges, you might just fit four tanks in the same space? he might need more tanks :lol: |
Where is the pump going to be?
|
directly on the metal floor board...infront of tank #2...pump head facing back of trunk/car
|
Right in front of the middle tank...tentalively speaking.
Beat me to the answer, Abner! :beer: :beer: :lol: |
:beer:
|
The box of goodies came in today..........hopefully we can finish the install this weekend.:thumbup:
|
|
:lol: :beer: Very nice Richard.
|
:lol: :lol: :lol: Nobody was to know about that setup!:p :lol:
|
Originally Posted by Richard L
(Post 4663984)
thats a lot of work! :crap: |
Can't wait to see the pump.
|
|
The Shurflo pump does not require a priming pump - nice set up by the way.:lol:
|
http://www.aquamist.co.uk/forum/gallery/abner/7T.jpg
+ http://www.supplierlist.com/photo_im...water_pump.jpg Release date this weekend:lol: |
:lol:
hey where were you tonight? |
Originally Posted by SlowCar
(Post 4668426)
|
:lol:
kind of overkill :lol: |
oops :p
|
|
So nice! I can't wait to get this install to be finished and over with it.:thumbup:
30PSI.........here I come:D |
Wow, you guys are crazy :beer:
|
Hey Abner, you have a 24qt install in the works in the near future?? :lol: {thumbup}
|
Originally Posted by milo
(Post 4683056)
So nice! I can't wait to get this install to be finished and over with it.:thumbup:
30PSI.........here I come:D 30psig with your 50trim and a good tune - the car will be m o v i n g :beer: |
Originally Posted by xiaoni420
(Post 4683115)
Hey Abner, you have a 24qt install in the works in the near future?? :lol: {thumbup}
lets see how long 18 quarts will last milo aka johnny tran :p not too long :lol: |
{thumbup} {thumbup} {thumbup} {thumbup}
I am lost for words... |
Lots-O-Meth!
|
Originally Posted by Richard L
(Post 4683406)
{thumbup} {thumbup} {thumbup} {thumbup}
I am lost for words... So was Abner, but everyone can barely understand him anyways....:lol: |
Originally Posted by milo
(Post 4683426)
So was Abner, but I can barely understand him anyways....:lol:
:lol: |
I can understand you Abner! Haha
|
Originally Posted by xiaoni420
(Post 4683824)
I can understand you Abner! Haha
|
size does matter;)
|
Originally Posted by milo
(Post 4684178)
Gee, that doesn't suprise with your screen name..........I wouldn't doubt that you guys are related.:crap: :lol:
|
:lol: :beer:
|
Originally Posted by xiaoni420
(Post 4684230)
Don't let my screen name fool you :lol:
red evo8.........your so right size does matter so does the amount of boost.:lol: |
Now that the tanks are in there, how do you fill them? It appears that the fill nozzles are too close to the underside of the package shelf to get a spout in there.
|
:beer:
|
Originally Posted by Whoosh
(Post 4684285)
Now that the tanks are in there, how do you fill them? It appears that the fill nozzles are too close to the underside of the package shelf to get a spout in there.
Actually there is plenty of room to fill these tanks up.....it was engineered in the over all design. |
Originally Posted by Whoosh
(Post 4684285)
Now that the tanks are in there, how do you fill them? It appears that the fill nozzles are too close to the underside of the package shelf to get a spout in there.
http://www.nextmill.net/bmw540/pictures/01060009.JPG |
Originally Posted by milo
(Post 4684324)
Rear speaker has to be completely removed just to get them filled.:( :p :lol:
Actually there is plenty of room to fill these tanks up.....it was engineered in the over all design. the engineering solution is called a funnel and a hose :D http://img2.putfile.com/thumb/6/16617401950.jpg |
Originally Posted by SlowCar
(Post 4684435)
:lol:
the engineering solution is called a funnel and a hose :D http://img2.putfile.com/thumb/6/16617401950.jpg |
:drink:
|
Dame Abner You Are The Man!!!
That Look Just Pro~ |
Originally Posted by edwin
(Post 4684604)
Dame Abner You Are The Man!!!
That Look Just Pro~ you got the evo and the sc mini cooper....both good candidate for injection {thumbup} |
nice
|
All times are GMT -7. The time now is 04:00 AM. |
© 2024 MH Sub I, LLC dba Internet Brands