Apexi Super Itc Installation
#1
Newbie
Thread Starter
Join Date: Jan 2004
Location: puerto rico
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
Apexi Super Itc Installation
I NEED TO KNOW IF ANYBODY HAS INSTALLED A APEXI SUPER ITC ON A EVOLUTION VIII. BECAUSE I DID.....BUT I NEED SOME COMMENTS ON THE SETTINGS BECAUSE THE CHECK ENGINE LIGHT TURNS ON.....
#5
Evolved Member
Join Date: May 2003
Location: Vancouver, WA
Posts: 597
Likes: 0
Received 0 Likes
on
0 Posts
" The Super ITC adjusts ignition timing by +/-15% by modifying the crank/cam angle signal on certain vehicles. The timing curve is adjusted by setting the timing at 5 different points along the RPM range and the values between are interpolated by the ITC from those 5 points. The Super ITC used in conjunction with the Super AFC fuel controller creates a new dimension of tuning with piggyback computers. A'PEX recommends having the Super ITC installed and tuned by authorized shops"
Taken from alamo motorsports..........http://www.alamomotorsports.com/prod...pexi/sitc.html
Taken from alamo motorsports..........http://www.alamomotorsports.com/prod...pexi/sitc.html
#7
EvoM Guru
iTrader: (5)
Hmm.. I haven't seen an APEXi product with that style in a long time? How old is it?
Anyway, Set everything for "no adjustment" that is, all zeros and see if it still causes a CEL, if it does, doublecheck all your connections, and solder everything, verify the ground is adequate..
the official apexi site no longer lists a Super ITC..
Anyway, Set everything for "no adjustment" that is, all zeros and see if it still causes a CEL, if it does, doublecheck all your connections, and solder everything, verify the ground is adequate..
the official apexi site no longer lists a Super ITC..
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post