I wasn't asking about the products available for the car, I was asking if anyone had found out if the SAFC would work with the car. A while back between otter and lsd we were trying to figure out if it would work with our cars because the ecu in our car auto learns and makes the tune irrelevant. I asked a question about whether or not it would work, and you never answered that question, therefor your response was irrelevant. I know about Evoscan and ODBII Reprogramming; I was asking about the SAFCII or The SAFC NEO because of its ability to be tuned on the fly without the use of a laptop. A good tune here on the dyno cost around $300 after all is said and done. Chillax a little bit there big guy... It's OK

 

Just finished what I could on the dash with what paint I had. Check it out!



And Springs made it here today, check out that box!



I will take better pictures once I get the car cleaned up, and it is daylight outside!

 

Didn't know if anything new has been developed for our cars... My last RA was back in 09, so I've been away from the forums since then really, there are a few familiar names left in the forums, but most of the guys from back then just aren't active anymore.

 

Hey, I managed to get my old evolutionM name back: will be updating from this name from now on.

 

Yea I understand. A lot has changed and been learned even since I joined the forums back in 2011. I saw you said Evo Scan in a post.

just for clarity, and if anyone else is reading this.
- Evo Scan will do your data logging
- MMC Flash will read from and write to the ECU
- ECU Flash will modify/tune the files pulled from the ECU

BTW I love the white dash. Mine looks the same in the white car. You mentioned Otter too, I actually own his RA now. The motor I'm turboing came out of it.

 

The white dash in the car includes the gauge cluster, the cluster bevel, and the center console, I will be uploading some pictures to show the progress here in a few, the center console hasn't been reinstalled yet so dont judge LOL

 

Took the gauge cluster apart, removed, and painted the bevel to match the dash.





Removed the center console, and painted the ashtray, and silver part primer white.

 

now I am looking for the floor board carpet for the car, and links would be helpful for this one.... It's kind of hard to find!

 

These are the finished dash pieces installed in Ginger.

 

This project is something I learned from Otter a long time ago, can anyone tell me what I am making?

 

Going to give the car a good bath tomorrow, and take some new pictures of her.

 

 

Removed, primed, and wet sanded the hood list night. Pictures will be uploaded before the end of the day.

 

Had to put the hood back on... It is going to rain

 

got my first can of Nissan GTR (Gun Metal) gray paint today, and two cans of clear, going to work on that hood tomorrow provided its not raining