When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Damn! You guys got a lot of them standard OEM goodies! Evo Steering Wheel too! Take example those door mouldings. We don't have that here in the Philippines.
Damn! You guys got a lot of them standard OEM goodies! Evo Steering Wheel too! Take example those door mouldings. We don't have that here in the Philippines.
Yeah the Sport varient is pretty much almost identical to Ralliart, so a lot of OEM goodies . Only thing missing is a 2.4l 4G94 and it would be a Ralliart, but will have to make do with the 2.0l 4G63NA.
I think the door mouldings are something to do with vehicle safety as a lot of cars have them here in the UK. I could be wrong and it just part of the Ralliart body styling.
Yeah the Sport varient is pretty much almost identical to Ralliart, so a lot of OEM goodies . Only thing missing is a 2.4l 4G94 and it would be a Ralliart, but will have to make do with the 2.0l 4G63NA.
I think the door mouldings are something to do with vehicle safety as a lot of cars have them here in the UK. I could be wrong and it just part of the Ralliart body styling.
You guys are so lucky! We have that 4G63NA variant over here too. Altough its a CVT though and most owners would change to a stick and go for turbo.
Looking for a set of those mouldings and that steering wheel! Apparently, the dealerships here don't sell those mouldings.
You guys are so lucky! We have that 4G63NA variant over here too. Altough its a CVT though and most owners would change to a stick and go for turbo.
Looking for a set of those mouldings and that steering wheel! Apparently, the dealerships here don't sell those mouldings.
Yeah, have seen a few asian based lancers getting turboed, I've thought about getting my engine turboed, but it might be way to expensive here.
If your looking for parts I'd recommend mitsibishipartswarehouse they sell nearly everything for lancers, am sure you could get the mouldings and steering wheel from them. This is the site I got my ralliart grille from, bit pricey but still worth it
Yesterday I got the Lancer's new Custom Cat-Back added. Its a stainless steel 2" system with silencer and back-box with a 3" rolled tip fitted. I am so happy with the result The noise it makes is just perfect, especially on start up. With the silencer fitted its nice and quiet at motorway speeds so there is minimal droning.
Here's a quick vid of how it sounds took it on my phone so the quality isn't the best, sorry for how dark it is didn't get much chance to do some filming due to the rain that day. https://www.dropbox.com/s/t98vjnhnz4...%2046.mov?dl=0
Took some photos today after work to show it of in the light, the tip sticks out a little from the bumper, but it still looks a lot better than it was . Also put up an old photo of the exhaust for comparison.
There's so many roadworks going on in my area right now that its becoming impossible to keep this thing clean for at least a day -_-.
I am back with another update and this time the Lancer has had some surgery .
The old OEM spoiler has been replaced with a fiberglass EVO 8/9 replica spoiler and the roof now has a vortex generator. I had also intended to have a bumper lip installed but due to it not following the bumper line 100% its proving to be a tad difficult.
To top those mods off the spoiler has been painted black and silver and the roof has also been painted black.
I installed an interior brake light on the parcel shelf, I've actually had it installed for a while just not plugged in , some light still shines out from underneath so I may need to tighten it down some more.
I sent my damaged Rotas off to be repaired so I had to run on my OEM rims for a few days. During that time I also had to deal with unbalanced wheels, off steering and a few other things. But thankfully after I got the Rotas back most of those problems went away. After that sent the car in for a service and she's sitting and running pretty....apart from a minor belt squeak, only happens on really cold starts though .
Anyway here are some pics of how the Lancer looks now
Nice pic of the Lancer after it got its spoiler and VG. Running the OEM 16's.
So did a few small mods to the car in the last few weeks, to start I swapped the crappy standard dash trim out for carbon fibre ones. The install was dead easy just four screws and a few clips and everything was done in minutes.
I also swapped my weathered locking wheel nuts for some aluminium Mishimoto open-end locking nuts. Got to say, I really like the way the Mishimoto's look over the old "stainless steel" ones I got when I bought the Rotas.
Also the weather has been really nice lately, big change from near constant rain :P, so was able to give the car a proper wash, and get all the bugs off. Nothing like a nice clean car
Nice work again. The carbon accents look great against the black dash. For some reason I just took notice of the reverse fog lights or reflectors? These are not on the USDM Ralliarts. I like them, do you happen to have pics of them at night?
. Only thing missing is a 2.4l 4G94 and it would be a Ralliart, but will have to make do with the 2.0l 4G63NA. 
. Also put up an old photo of the exhaust for comparison.
There's so many roadworks going on in my area right now that its becoming impossible to keep this thing clean for at least a day -_-. 
.
