Notices
04-06 Ralliart Engine/Drivetrain (no forced induction)

rrm sri problems

Old Jan 29, 2007 | 09:42 PM
  #1  
[C-4]PUMA's Avatar
Thread Starter
Newbie
iTrader: (7)
 
Joined: Jun 2006
Posts: 94
Likes: 0
From: MPLS, MN
rrm sri problems

Alright, car is an 05 auto, just installed an rrm sri (UDP is the only other mod). So after the install I let it idle for about 10 min then take it for a 15-20min drive the let the ecu learn it. Came home, parked it, and everything was fine.

Then I wasnted to play around with it a little more so I take it out again, 45 minutes of fun go by flawlessly. Then the trouble starts, from a dead stop up a small hill full power and all the sudden i'm not giving it any power,(pedal is down the same but no power) so I let off and get back on it not so hard it comes though a little choking, get to the stop sign and it sputters and dies on me. So I start it up again, choking a little but comes back to life and i'm on my way, try another full power from a stop and it's fine. Then about 5 min later I go to turn around, put it in reverse and it dies; start it up, put in drive, DIES; start up again, rev high, let it settle, go for drive, DIES; start again rev to 2000 for about 25 seconds, let it settle and put it in drive, she starts going. I get to another stop (4 blocks later) sign and I can hear the car sputtering, but shes still good, make another turn (5blocks later) and she dies again. Start it up and make it the rest of the 7 blocks to my house no problem, waiting for the garage to open and it dies, start up, try to pull forward and it dies.

So, now it's in the garage, open the hood to check everything and it all looks good, the car idles at 800 like it's supposed to but sounds like it's not getting the air it needs and is just sputtering.

I have no idea what the problem is, I really need help on this.
Reply
Old Jan 29, 2007 | 10:06 PM
  #2  
stEVOx's Avatar
Evolved Member
 
Joined: Jul 2006
Posts: 1,191
Likes: 0
From: Australia
there waS a thead recently about something similar...
i think it was to do with too much oil on the filter or something...
just search it up coz im tired atm...
Reply
Old Jan 29, 2007 | 11:36 PM
  #3  
rally-on's Avatar
Newbie
 
Joined: Aug 2006
Posts: 96
Likes: 0
From: las vegas
and just double cheak all conections and re cheak all parts
you will find it
Reply
Old Jan 30, 2007 | 06:05 AM
  #4  
ralliart329's Avatar
Evolved Member
iTrader: (6)
 
Joined: Nov 2004
Posts: 1,409
Likes: 0
From: Long Island, NY
possible the MAF sensor isnt on their right.
Reply
Old Jan 30, 2007 | 07:43 AM
  #5  
KreepaEvoX's Avatar
Evolved Member
 
Joined: Mar 2005
Posts: 687
Likes: 0
From: Ponce P.R.
Your MAF aint installed right, or theres a big air leak after the MAF.

There should be any other reason for the behaviour of the car
Reply
Old Jan 30, 2007 | 01:39 PM
  #6  
[C-4]PUMA's Avatar
Thread Starter
Newbie
iTrader: (7)
 
Joined: Jun 2006
Posts: 94
Likes: 0
From: MPLS, MN
Originally Posted by stEVOx
there waS a thead recently about something similar...
i think it was to do with too much oil on the filter or something...
just search it up coz im tired atm...
I looked at that already but it did'nt help me.


Originally Posted by KreepaEvoX
Your MAF aint installed right, or theres a big air leak after the MAF.

There should be any other reason for the behaviour of the car
Yep found the problem, the inner center cap for the cone filter came out and jammed itself in the sri pipe... so simple, yet blocked so much airflow that it made the MAF hate me.

Thanks for the help guys!
Reply


Thread Tools
Search this Thread

All times are GMT -7. The time now is 01:35 AM.