sqeeking sounds
its right at the front of the slave were it connects to the tranny. that link squeaks for what i dont know why i justk now thats wer it comes from, but i know its not hurting anything but its is anoying.the shifting link seems to move a bit to you can make it squeak with ur hand at least mine can im sure urs can to.
dayam annoying if you ask me... sometimes in the summer i felt like my car was a old POS car. squeeking and stuff.. sounded like crickets under the hood..
now Bruce since u said u got that slave part replaced...is the sound fixed or is it still tehre??
i want the dealer to replace this part i dont want to ever hear it again..
Squeaking can also come from the fulcrum that the release fork pivots on. It's a part that needs to be greased every one in awhile, problem is, you really can't get to it, that I know of, without pulling the trans. You could try pulling the release fork dust boot and you might be able to get the tip of a grease gun in there, but I'm doubtful.
Evolved Member
Joined: May 2005
Posts: 644
Likes: 0
From: naples,fl
i dont think its that otter but the slave link is deff the prb maby that though lol but isnt it kinda funny we all seem to have the same squeak, a few months ago i posted and asked abouta skueak and no one knew lol the dealer ship told me it was like some kinda fith injector for mivec and stuff just so they didnt have to do any work. now warrenty is up but i find that really funny ehter way,i think the perm fix would be to make some kind of berier between the 2 metals, ex tape rubber cement pluse grease so it cant rub, if that sounds rigged then maby other can sugest.
oyea make sure ur fluids are full it seems to happen more when the fluid is low and the pedle has play. possible from air so bleedem.
oyea make sure ur fluids are full it seems to happen more when the fluid is low and the pedle has play. possible from air so bleedem.
Newbie
Joined: May 2006
Posts: 22
Likes: 0
From: Kitchener, ontario
THis is super funny, cause My car also started squeaking last week!! I will give it a try(greasing the slave) and every lil joint I can find under there! Thanks in advance, the search button almost always owns!!
I'll definitely toss some grease on there... One thing i noticed is I don't even have to push the clutch pedal down, just put some pressure on the top of it and it stops squeaking...
One problem I'm having is that I just had my new clutch installed and it sounds like my brand new throw-out bearing is going already...
One problem I'm having is that I just had my new clutch installed and it sounds like my brand new throw-out bearing is going already...
... IE have fun
Evolved Member
Joined: May 2005
Posts: 644
Likes: 0
From: naples,fl
lol ya it stops when u just put the slightist amount of pressure to the peddle, , but also who is having this sound, with the stock cluthc line / vs ss line?? anyone??
also i was never big into getting super into the clutch system but should i be able to press my slave in by hand when the cars off??? i never tryed it b4 so i wouldent know cause no other cars ive had sqeaked.
also i was never big into getting super into the clutch system but should i be able to press my slave in by hand when the cars off??? i never tryed it b4 so i wouldent know cause no other cars ive had sqeaked.