Paradigm Performance Ported Intake Manifold
Evolving Member
Joined: Jul 2010
Posts: 326
Likes: 2
From: Pursuance Motor Works - Calgary, Alberta
I would like a review as well.
Thank you in advance.
I did find this...
https://www.evolutionm.net/forums/se...-reviewed.html
Thank you in advance.
I did find this...
https://www.evolutionm.net/forums/se...-reviewed.html
I inspected the new parts from PPI and the port work looks good, they clearly shaved off some meat around the intake runners to improve the already good stock gasket match job. The went on down into the runners a bit to straighten things out a bit too. On the throttle body side of the intake they hogged out the opening and provided a bigger gasket to match.
Last edited by Resurrected RA; Sep 5, 2010 at 06:19 PM.
I don't know gains and did not feel improvements with my buttdyno. I'm using his 65mmtb and ported IM.
One thing i would like to warn people of is the service. After you pay him, you will not be able to contact him. So if you are going with him for the cheaper prices, then just place your order and wait patiently.
Plus, the tb I received has massive corrosion and looks like ****! Felt like I was gonna catch a disease if I didn't wear gloves while handling the TB. It also has the whistle/squeak when you push the gas pedal in. VERY annoying, specially in stop and go traffic when you are constantly pushing on the pedal. Iv asked him a few times about those 2 problems and he ignores all my emails.
I will not be doing any more business with PPI again.
One thing i would like to warn people of is the service. After you pay him, you will not be able to contact him. So if you are going with him for the cheaper prices, then just place your order and wait patiently.
Plus, the tb I received has massive corrosion and looks like ****! Felt like I was gonna catch a disease if I didn't wear gloves while handling the TB. It also has the whistle/squeak when you push the gas pedal in. VERY annoying, specially in stop and go traffic when you are constantly pushing on the pedal. Iv asked him a few times about those 2 problems and he ignores all my emails.
I will not be doing any more business with PPI again.
Trending Topics
I don't know gains and did not feel improvements with my buttdyno. I'm using his 65mmtb and ported IM.
One thing i would like to warn people of is the service. After you pay him, you will not be able to contact him. So if you are going with him for the cheaper prices, then just place your order and wait patiently.
Plus, the tb I received has massive corrosion and looks like ****! Felt like I was gonna catch a disease if I didn't wear gloves while handling the TB. It also has the whistle/squeak when you push the gas pedal in. VERY annoying, specially in stop and go traffic when you are constantly pushing on the pedal. Iv asked him a few times about those 2 problems and he ignores all my emails.
I will not be doing any more business with PPI again.
One thing i would like to warn people of is the service. After you pay him, you will not be able to contact him. So if you are going with him for the cheaper prices, then just place your order and wait patiently.
Plus, the tb I received has massive corrosion and looks like ****! Felt like I was gonna catch a disease if I didn't wear gloves while handling the TB. It also has the whistle/squeak when you push the gas pedal in. VERY annoying, specially in stop and go traffic when you are constantly pushing on the pedal. Iv asked him a few times about those 2 problems and he ignores all my emails.
I will not be doing any more business with PPI again.
What does turbo and n/a have to do with the service? What factors are you talking about
Factors such as your tune post install of TB & IM.
You've criticized the TB alone, and that I understand. You mentioned nothing of the IM port work which is what I'm getting. I have always been able to reach PPI no problems, so your experience may limited. I have not heard one bad thing about PPI in the RA community so that factor speaks volumes as well
You've criticized the TB alone, and that I understand. You mentioned nothing of the IM port work which is what I'm getting. I have always been able to reach PPI no problems, so your experience may limited. I have not heard one bad thing about PPI in the RA community so that factor speaks volumes as well
Factors such as your tune post install of TB & IM.
You've criticized the TB alone, and that I understand. You mentioned nothing of the IM port work which is what I'm getting. I have always been able to reach PPI no problems, so your experience may limited. I have not heard one bad thing about PPI in the RA community so that factor speaks volumes as well
You've criticized the TB alone, and that I understand. You mentioned nothing of the IM port work which is what I'm getting. I have always been able to reach PPI no problems, so your experience may limited. I have not heard one bad thing about PPI in the RA community so that factor speaks volumes as well
I'm simply letting people know about the service and quality of the items
I received. My intake mani came dirty as **** and had to spend quite some time cleaning it out and getting all the shavings out of it. TB has MASSIVE corrosion and has a loud whistle
so we can compare ?!?
I went with PPI for porting/coating my exhaust manifold, 10.5 hotside, and 02 housing. I'll post a thorough review in the next couple days. It went pretty well for the most part.