I got an Evo 8 wheel, without the airbag and i'm gonna try and install it. It seems like i'm missing a few parts to make it work. There is no allen socket on the side and there really isn't anything inside of the actual wheel.

My question is, since the wheel is a direct swap, is it possible to take parts out of my original wheel and use those to replace whatever is missing out of the inside? the wheel i have doesn't seem to have anywhere for the steering column to connect to.

Anyone have any pics of the inside of an Evo steering wheel?

 

It should really look like the inside of your stock one very similiar anyway.

Mine was just a direct swap stock off evo on. I hope you didn't pay too much for yours sounds like it could be missing some key pieces.

 

if you do try and swap your parts from the stock wheel to the evo wheel be very very careful with the clock spring.. i heard it is very expensive to replace if you break it. And it does break easy

 

i got mine without the allen bolt inside the evo one so i had to disasemble the stock one to put the allen bolt into the momo. have fun

 

so the parts were interchangable