Okay, so last night my driver side engine mouth finally took a dump. the rubber boot was ripped so i decided to find the best write up on the DIY Engine mounts So i took it apart, and cut the rubber had some liquid come out of it.
Now my hold up finding the resin. I went all over town only to find that all they had was fier glass resin. and home depot has ABS Cement. The resin that was in the rite up unfortuantly, we dont have that name brand in arizona.
Any help on the next best thing to use.

Some ideas i heard was,
Bondo with hardener,
JB Weld
Window Weld
epoxy

Thanks

 

How soon does it have to be fixed by? Monday morning?

 

Mys, its time for an oil change to Mobil 1 from RP! You've hit 80k.

I think brand shouldn't matter as long as the product does what it does. Also, if you have to have it done by Monday, you really don't have a choice!

 

Monday would be nice, but i rather do it right the first time..MYS, i took your rite up but they didn't have that brand of primer or resin

so what way should i do it?

 

well being in the situation your in I'd go with the window weld ,try to let it fully cure though...imo