Debadged and new gauge!
Thread Starter
Evolving Member
iTrader: (2)
Joined: Jan 2009
Posts: 433
Likes: 0
From: Long Island, NY
I'll try to take a picture of where I tapped into. the line was right off of the turbo right before the boost controller (under the strut bar).
I picked up the pod at a Autometer dealer.
The gauge actually goes w the interior pretty good. There's a blue line on our gauges and the boost gauge lights up blue in the same spot. Also the numbers on the boost gauge are white and so are the numbers on our regular gauges. It goes together very well IMO.
I picked up the pod at a Autometer dealer.
The gauge actually goes w the interior pretty good. There's a blue line on our gauges and the boost gauge lights up blue in the same spot. Also the numbers on the boost gauge are white and so are the numbers on our regular gauges. It goes together very well IMO.
I'll try to take a picture of where I tapped into. the line was right off of the turbo right before the boost controller (under the strut bar).
I picked up the pod at a Autometer dealer.
The gauge actually goes w the interior pretty good. There's a blue line on our gauges and the boost gauge lights up blue in the same spot. Also the numbers on the boost gauge are white and so are the numbers on our regular gauges. It goes together very well IMO.
I picked up the pod at a Autometer dealer.
The gauge actually goes w the interior pretty good. There's a blue line on our gauges and the boost gauge lights up blue in the same spot. Also the numbers on the boost gauge are white and so are the numbers on our regular gauges. It goes together very well IMO.

heres the Rexspeed POd that is in the making
https://www.evolutionm.net/forums/ev...llar-pods.html
Last edited by 08Lancer89; Apr 30, 2009 at 02:43 PM.
Thread Starter
Evolving Member
iTrader: (2)
Joined: Jan 2009
Posts: 433
Likes: 0
From: Long Island, NY
guess where I did it is oky too right
heres the Rexspeed POd that is in the making
https://www.evolutionm.net/forums/ev...llar-pods.html

heres the Rexspeed POd that is in the making
https://www.evolutionm.net/forums/ev...llar-pods.html
Thread Starter
Evolving Member
iTrader: (2)
Joined: Jan 2009
Posts: 433
Likes: 0
From: Long Island, NY
Went in to get a nut for my battery cover since it was missing one and two screws for the intake air duct thing... 30 minutes later a "mechanic" comes to get my from waiting room "um I can't find anything missing"
I walk out there to tell him to get my car off the lift, point at the holes, and I get a "oh..." from him.. Lmao
Thread Starter
Evolving Member
iTrader: (2)
Joined: Jan 2009
Posts: 433
Likes: 0
From: Long Island, NY
nice; i was just wondering about one of the status screens on the ralliart. isn't there a very poor version of a boost gauge on the dash? because when i take my foot off the throttle and let the boost build the guage builds up, and when i press the gas, it decreases. i think it's the status screen that tells you avg. mph/mpg, (what i'm talking about is the little bar increasing decreasing)



