2010 RA inside ventilation problem
#1
Newbie
Thread Starter
Join Date: May 2019
Location: Finland
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
2010 RA inside ventilation problem
Hi. I have this kinda problem in my Ralliart 2010.
Blower works okay in windshield setting and blowing to feet. But when I turn mode to face ventilation vents nothing comes out even at full power.
Can it be there is mode motor broken or is there some another options?
I found this bulletin repair. Is this the most likely reason why my face vents are not working? Anyone done this? Is it too hard to do on yourself?
https://www.google.com/url?sa=t&source=web&rct=j&url=http://mmc-manuals.ru/tsb/MMNA/tsb1255001rev.pdf&ved=2ahUKEwjHztGozpHiAhUtyKYKHUh pA9YQFjAPegQIBhAB&usg=AOvVaw3q-W05hjA9u1G9s5ywKFj-&cshid=1557513658805
Blower works okay in windshield setting and blowing to feet. But when I turn mode to face ventilation vents nothing comes out even at full power.
Can it be there is mode motor broken or is there some another options?
I found this bulletin repair. Is this the most likely reason why my face vents are not working? Anyone done this? Is it too hard to do on yourself?
https://www.google.com/url?sa=t&source=web&rct=j&url=http://mmc-manuals.ru/tsb/MMNA/tsb1255001rev.pdf&ved=2ahUKEwjHztGozpHiAhUtyKYKHUh pA9YQFjAPegQIBhAB&usg=AOvVaw3q-W05hjA9u1G9s5ywKFj-&cshid=1557513658805
#3
Newbie
Thread Starter
Join Date: May 2019
Location: Finland
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
E: and if you mean that the vents would been closed by knob turned to far left or right. Then no. I have positioned them right lol
Last edited by nassek; May 10, 2019 at 11:23 PM.