Front/Right brake was dragging - I thought all the black dirt was from a blown shock. Nope - brake was noticeably hotter than the left side.

I had already purchased new Centric Rotors and Hawk Pads to do the fronts and rears at 100K miles (I am at 96K) . I had bought the rear rotors off a forum member and bought new front rotors...

I removed the front caliper and bracket (and put a fresh coat of paint on... ) and was assembling all the bits for the brake parts swap over.

I find the left and right rear rotors... and pads for for front and rear... I found the front(?) rotors... but wait! They look like.. the rears! Dang it! I have four rear rotors...

F/R rotor was still good - so I re-used it.

Now I have to buy new Centric front rotors and... sell the extra rear rotors...

But the brake isn't dragging now, I just properly lubed the pins...

 

did you upgrade the front Calipers or stay with stock?
At least you didn't crack your hardlines.. this happened to me PITA fixing that.

 

Stock calipers. Just a BBK (Better Brake Kit)

Upgraded rotors and pads FTW!

 

All four rotors installed, Hawk pads installed, and I refreshed the red paint on the OEM calipers!

WooHoo!

Looks great/stops better!

Now to post up those extra rear rotors and OEM Mitsu pads I won't be needing...