p0420 delete/fix???!!!!
Jul 8, 2010, 01:11 AM
#1
Evolving Member
Thread Starter
iTrader: (1)
Join Date: Jan 2010
Location: Alberta / Saskatchewan
Posts: 109
Likes: 0
Received 0 Likes
on
0 Posts
p0420 delete/fix???!!!!
can you please try this for you ses P0420
<table name="Enable catalytic monitoring (P0420)" category="Misc" address="503BC" type="1D" scaling="Hex8"/>
write that in you xml load and change your bit to a zero and see if you get the cel
im now 1000 miles and clear
so i need someone willing to apply it to their car that currently has the cel and see if it comes on again,
if this works we can say atleast the 2010's have p0420 fix and than we can get looking into 09
<table name="Enable catalytic monitoring (P0420)" category="Misc" address="503BC" type="1D" scaling="Hex8"/>
write that in you xml load and change your bit to a zero and see if you get the cel
im now 1000 miles and clear
so i need someone willing to apply it to their car that currently has the cel and see if it comes on again,
if this works we can say atleast the 2010's have p0420 fix and than we can get looking into 09
Last edited by bulhas; Jul 8, 2010 at 06:02 PM.
Jul 9, 2010, 08:11 AM
#3
Evolving Member
iTrader: (2)
Join Date: Nov 2009
Location: Dubuque, IA
Posts: 424
Likes: 0
Received 0 Likes
on
0 Posts
can you please try this for you ses P0420
<table name="Enable catalytic monitoring (P0420)" category="Misc" address="503BC" type="1D" scaling="Hex8"/>
write that in you xml load and change your bit to a zero and see if you get the cel
im now 1000 miles and clear
so i need someone willing to apply it to their car that currently has the cel and see if it comes on again,
if this works we can say atleast the 2010's have p0420 fix and than we can get looking into 09
<table name="Enable catalytic monitoring (P0420)" category="Misc" address="503BC" type="1D" scaling="Hex8"/>
write that in you xml load and change your bit to a zero and see if you get the cel
im now 1000 miles and clear
so i need someone willing to apply it to their car that currently has the cel and see if it comes on again,
if this works we can say atleast the 2010's have p0420 fix and than we can get looking into 09
Would this be the same for an 09RA? If so I have P0420 and could give it a shot.
Jul 9, 2010, 11:08 PM
#6
Evolving Member
Thread Starter
iTrader: (1)
Join Date: Jan 2010
Location: Alberta / Saskatchewan
Posts: 109
Likes: 0
Received 0 Likes
on
0 Posts
P0420 Delete works great on my car even attempted to make it go off using a torch on, using compressed air, putting it in water nothing made this bad boy click on
Trending Topics
We will see how this goes. I know i got a CEL without this fix in the 1st 50 miles... I guess its safe to say the spacer on the UR test pipe doesn't fix the CEL but hopefully this will be the cure! 
I believe this is THE FIX!! 
Jul 12, 2010, 04:43 AM
#14
Evolving Member
iTrader: (2)
Join Date: Nov 2009
Location: Dubuque, IA
Posts: 424
Likes: 0
Received 0 Likes
on
0 Posts
So how can I try this out on my 09 RA? I have all the software and a tactrix cable. I've just never got into editing the XML files, I tried following the guide in the X forums awhile back but none of the numbers were matching up so I gave up.
Jul 12, 2010, 06:36 AM
#15
Evolving Member
Thread Starter
iTrader: (1)
Join Date: Jan 2010
Location: Alberta / Saskatchewan
Posts: 109
Likes: 0
Received 0 Likes
on
0 Posts
first thing we need to know the proper address, does anyone know if the mut address table is the same for 09 ralliart/GSR as it is for 2010??
ill write a quick how to tonight
ill write a quick how to tonight