Injen LICP Installed Please
Thread Starter
Evolved Member
iTrader: (16)
Joined: Jun 2007
Posts: 757
Likes: 0
From: York, PA..... GSX Bound
Bolting on an IC and IC piping should not be a chore by any stretch. Its one of the easiest thing you can do. If you are haveing issues these parts are crap.
I have a logic performance LICP and if it took me 30 min to put it on thats alot. The Injen UICP fits without issue. It literly takes no time to install. Maybe you need to take it to a shop to get it worked out.
I have a logic performance LICP and if it took me 30 min to put it on thats alot. The Injen UICP fits without issue. It literly takes no time to install. Maybe you need to take it to a shop to get it worked out.
I just put my own clutch in lol I dont think I need a shop for a licp......if I say it doesnt fit right then it doesnt fit right......appreciate the feedback though
Thread Starter
Evolved Member
iTrader: (16)
Joined: Jun 2007
Posts: 757
Likes: 0
From: York, PA..... GSX Bound
my injen pipe fit like crap when i had it it took two people to hold it on and tighten the clamp but it always blew back off .... so now its collecting dust and i have the ams lower pipe took 2 mins to put on the car and tighten down
Installed my FMIC today, (XS-POWER) everything went on today no problem. THe only thing is you can't reinstall your undertray. The intercooler is way to big. You can modify your understray if you want to keep it though. I used a samco kit all around and t-bolts. good set up. I'm happy with it.
Thread Starter
Evolved Member
iTrader: (16)
Joined: Jun 2007
Posts: 757
Likes: 0
From: York, PA..... GSX Bound
Installed my FMIC today, (XS-POWER) everything went on today no problem. THe only thing is you can't reinstall your undertray. The intercooler is way to big. You can modify your understray if you want to keep it though. I used a samco kit all around and t-bolts. good set up. I'm happy with it.
Wow good for you...We want pics
with the bumper off and on .......XSpower is still junk lol has always been and will always be....How long did it take you and how many people did it take? Didyou trim your bumper?SJ
ANYONE WITH THIS INFO I NEED IF NOT PLEASE CLOSE THIS THREAD
Last edited by SpeedJunkyz; Apr 18, 2008 at 02:48 AM.
Wow good for you...We want pics with the bumper off and on .......XSpower is still junk lol has always been and will always be....How long did it take you and how many people did it take? Didyou trim your bumper?
SJ
ANYONE WITH THIS INFO I NEED IF NOT PLEASE CLOSE THIS THREAD
with the bumper off and on .......XSpower is still junk lol has always been and will always be....How long did it take you and how many people did it take? Didyou trim your bumper?SJ
ANYONE WITH THIS INFO I NEED IF NOT PLEASE CLOSE THIS THREAD
The bumper was not trimmed. I did not install the underguard. I 'll paste some pics w/ the bumper on. I love it, great intercooler.
Thread Starter
Evolved Member
iTrader: (16)
Joined: Jun 2007
Posts: 757
Likes: 0
From: York, PA..... GSX Bound
Congrats....take care of it, because XSpower is worthless with customer service, im happy for you
Thread Starter
Evolved Member
iTrader: (16)
Joined: Jun 2007
Posts: 757
Likes: 0
From: York, PA..... GSX Bound
