It looks like we have a BIG VERY BIG problem on installing and get the car running with AEM.At first we installed it and the car's engine was rinning just fine for a couple of hours.

The next day we started in again and was just fine and also we went for a ride.At night we could NOT start the car.After some efforts we started it BUT the engine sounded exactly like SUBARU engines or like it was running with 3 sparks.Finally we realised the one of the AEM's exit plugs was burned (4th of coil) and this was due to more power turning back to the ecu.

Then we tried an other AEM ecu that it was already running on an other evo but evo 3 and had no problem.The car got started and running just fine but after 10 min the exact same thing happened as above.

We put the factory ecu back and.....the car was working just fine with out any problem for DAYS!!!!Electrician told us after checking all the car's wires that there was NOTHING wrong with the car.

Now the AEM dealer in cyprus sent both of the ecu's to AEM to fix the exits.

I personally got toooooo disappointed from this ecu and the lack of support down here and do not know what to do....

 

Is there any AEM tuner in here that can give us some tips or anyone we can contact?the car is about to take part to a drag race so we need something asap.