Hello

I'm using a map that is using a evo 8 and working perfectly, mine is a evo 7 and since I read the instructions many times, doi not the problem.

I looked with a clock checker degrees crankshaft with the piston 1 at TDC, attached image.




modify the map, I put 40 degrees in the engine start / engine start options

Doi him the boot and not boot.

Activity in engine start / Advanced start / option and put as it appears in the picture attached.




Doi him the boot and without speeding, no boots, butt accelerator that is what happens

http://www.youtube.com/watch?v=B2U9Aa0CjQ4

Again I like to modify and put it out in the following picture attached



The car does this with full Throttle

http://www.youtube.com/watch?v=LnXjj_THd9E

With the throttle fully open, the car smokes a lot

Have lots of smoke and if I release the accelerator the car stops.

I have to change to make the car endurance with the engine running to make the setup of timing? is how to do this but if the engine does not start I can do nothing: (

See if someone helps me, the instructions do not help me more than this, the map is working perfectly on a Evo 8

THANKS