Notices

VR4 into GSR Conversion

Old Mar 26, 2003 | 09:09 PM
  #1  
Elias's Avatar
Thread Starter
Newbie
 
Joined: Mar 2003
Posts: 14
Likes: 0
From: Sydney, Australia
VR4 into GSR Conversion

I have just purchased a Lancer GSR (luv it!) with a blown motor.

I was considering the engine swap for a 4G63 out of a Galant VR4 or EVO I-III for strength purposes. If anybody has any info on just the dropping in of the engine (wiring/computer info not needed) it would be much appreciated.

Can I still use my box?
Are the mounts the same, if not which ones, do I use the Galant's or the Lancer's?
Also has anyone got one 4 sale?
Reply
Old Mar 27, 2003 | 07:13 AM
  #2  
TurboHead's Avatar
Newbie
 
Joined: Aug 2002
Posts: 23
Likes: 0
From: Perth Western Australia
Join the GSR_EVO yahoogroup... lots of guys on there that have done the swap. Send an e-mail to gsr_evo-subscribe@yahoogroups.com

TH
Reply
Old Jul 21, 2003 | 12:28 PM
  #3  
antos's Avatar
Newbie
 
Joined: Jul 2003
Posts: 57
Likes: 0
From: Brisbane - australia
yeah try the gsr_evo list, talk to wes macdonald (ivg63, red gsr in next issue of speed, 11.6 1/4 worked on by buzzengines.com) he has done it with modes of what works and what doesnt etc..hope it helps
Reply
Old Jul 21, 2003 | 12:54 PM
  #4  
HobieKopek's Avatar
EvoM Staff Alumni
20 Year Member
iTrader: (8)
 
Joined: Feb 2002
Posts: 7,701
Likes: 0
From: Long Island
What year GSR? I'm desparately seeking a transversely mounted 4g93T (or any DOHC 4g93 variant really). If you have one and are going through with the swap, think we could talk business?
Reply
Old Jul 22, 2003 | 10:09 AM
  #5  
antos's Avatar
Newbie
 
Joined: Jul 2003
Posts: 57
Likes: 0
From: Brisbane - australia
unfortunately my lancer is gone just recently, but i think wes might have or be able to get hold of a 4g93 easily enough, i can ask him and post back if you like, soon though i will have another gsr, if you havnt gotten a 1.8 by then maybe we can work something out

as for 2ltr engine, the engine mount that bolts on near front of cams is the only one that has to be modified as far as i am aware, with no major dramas, gsr g'box bolts up to the 2ltr shouldnt be a drama as wes's is gsr g'box and i have just finished building it back up as 5th and reverse teeth were slightly buggered as it would jump out of reverse. will you be running after market ems or standard vr4/evo computer??
hope it helps

Last edited by antos; Jul 22, 2003 at 10:16 AM.
Reply
Old Jul 22, 2003 | 06:17 PM
  #6  
Mivec's Avatar
Evolved Member
iTrader: (1)
 
Joined: Aug 2002
Posts: 505
Likes: 0
From: Brisbane
I am fairly sure HobieKopek is after a CE GSR engine, which unfortunately we did not get here.
Reply
Old Jul 22, 2003 | 06:42 PM
  #7  
HobieKopek's Avatar
EvoM Staff Alumni
20 Year Member
iTrader: (8)
 
Joined: Feb 2002
Posts: 7,701
Likes: 0
From: Long Island
I believe that's the one. It's got the tranny on the right side when you're facing the engine compartment. Cams on the left. Sorry to sorta hijack, just lookin' to pick up scraps.

EDIT: This'n



He's in NZ though. Thought it was AU but apparently my memory's fading. I've had such a pain in the *** time trying to find out if there were any other cars this engine has been available in.

https://www.evolutionm.net/registry/...hicleid=514&s=

Last edited by HobieKopek; Jul 22, 2003 at 06:46 PM.
Reply
Old Jul 23, 2003 | 02:14 AM
  #8  
Mivec's Avatar
Evolved Member
iTrader: (1)
 
Joined: Aug 2002
Posts: 505
Likes: 0
From: Brisbane
Yes that is a CE GSR engine, from memory a mate of mine was selling one (importer). I will check and see what he sais.
Reply
Old Jul 23, 2003 | 06:45 AM
  #9  
Lan Evo's Avatar
Evolved Member
 
Joined: Jun 2001
Posts: 1,618
Likes: 0
From: Tokyo, Japan
Sorry to hi-jack this yet again....

Hobie: I have a quote for that engine +AWD tranny from an Aussie shop some time ago. I will pm you some info. Obviously, you don't need the AWD, but some useful info....
Reply
Old Jul 23, 2003 | 07:03 AM
  #10  
HobieKopek's Avatar
EvoM Staff Alumni
20 Year Member
iTrader: (8)
 
Joined: Feb 2002
Posts: 7,701
Likes: 0
From: Long Island
Thanks guys. Ok, I'm givin' the thread back.

Best of luck on the swap!

EDIT: Please do PM me if you find anything though.

Last edited by HobieKopek; Jul 23, 2003 at 07:07 AM.
Reply
Old Jul 23, 2003 | 07:30 AM
  #11  
Lan Evo's Avatar
Evolved Member
 
Joined: Jun 2001
Posts: 1,618
Likes: 0
From: Tokyo, Japan
Although it is not entirely the same, but this might give you some idea....

http://evocoupe.20m.com/lancer.htm
Reply


Thread Tools
Search this Thread

All times are GMT -7. The time now is 08:11 PM.