Can anyone help me, im in perth and i want to buy some good rims/ mags but there and no good one does anyone know or a good place to go to

 

Try this place

http://www.mrmag.com.au/

or

http://www.weststatetyres.com.au/tyres_magshome.htm

or just go to any tyre shop as most of them stock many brands of rims.

Matt

 

yeah westate tyres are pretty good..

there are lots of tyre places.. you just gotta hunt around.. apparantly theres a place in perth who sell second hand nice rims.. but i can't remember what it is called again.. they trade them in and stuff.. it may even be west state tyres.. or mister mags..



Pete.

 

Or if anyone in perth are selling some let me know

thanks

jason

 

only usually over east.. Mivec and a couple other guys are selling some rims.. wouldnt be that much postage really.. there are a couple posts here about it somewhere.


Pete

 

Thanks for your help mate

 

tis cool.. thats why we have these forums.. also for the off topic bits

 

Hey guys, if i want to buy some rims or mags what are sizes, are the lancers mags same as any other cars ?????

 

lancer mags ?

there are lancer mags ! ?

where !

the ones in the hot 4's and Fast fours usually have ads for big rim retailers across australia

i rekon RPW should delve into everything and sell rims and the whole lot for mitsi, and become a big fast n furious store and sell nawssss..

but yeah, keep an eye out in the like the Quokka and stuff as well


Pete.

 

thanks im doing that but for small medium cars like lancers there is none. would the pcw 4 stud fit any 4 studed car or is there a differents in 4 studs

 

Yeah you have to be careful with PCD stud patterns as some of the older cars will use the imperial size of 4 studs on 114.3mm PCD. I'm pretty sure your model will have 4 studs on 100mm PCD.

Matt

 

thanks matt but how do i chack when buying them from someone.

 

Yeah you are correct, CC & CE Lancer has 4 x 100 stud pattern, the CC GSR has 4 x 114, I know go figure.

 

so how do i check the 100mm on the mag, is it the hole size of the distance from one stud to the other???

thanks for the help too

 

Well you could always try one on for size on your car, or sometimes this info is printed on the lip of the rim, or you could find out the manufacturer and model no. and ask them or you could just measure it with a ruler.

Matt