4g15 dohc power enhancements available?
#31
Newbie
Thread Starter
Join Date: Sep 2003
Location: melbourne
Posts: 22
Likes: 0
Received 0 Likes
on
0 Posts
yo sonic,
can you post pics of yours or your mates mirage with 4agze superchrger whenever possible.
Im quite puzzled though how\where sc will be located in the engine. What with air intake to tb, how do you get the sc to also direct air into tb?
can you post pics of yours or your mates mirage with 4agze superchrger whenever possible.
Im quite puzzled though how\where sc will be located in the engine. What with air intake to tb, how do you get the sc to also direct air into tb?
#32
Newbie
Join Date: Nov 2003
Location: Adelaide, Australia
Posts: 40
Likes: 0
Received 0 Likes
on
0 Posts
He has mounted it at the complete opposite end to what you think!!
Its behind the motor (near the firewall) at the bottom!!....Sorry no pics - its his project and is still underway!
Jaime
Its behind the motor (near the firewall) at the bottom!!....Sorry no pics - its his project and is still underway!
Jaime
#33
Newbie
Thread Starter
Join Date: Sep 2003
Location: melbourne
Posts: 22
Likes: 0
Received 0 Likes
on
0 Posts
yeahh be interested if your mate dynos his little beast. just want to see if he could at least get close to 100kw at wheels on stock boost (10psi?) on those 4agze sc.
You did mention your mates was Sohc 4g15, wonder on the DOHCS if this figure atw is realistic.
Anyways, have fun and do post pics when and if you can.
cheers mate!
You did mention your mates was Sohc 4g15, wonder on the DOHCS if this figure atw is realistic.
Anyways, have fun and do post pics when and if you can.
cheers mate!
#34
Newbie
Thread Starter
Join Date: Sep 2003
Location: melbourne
Posts: 22
Likes: 0
Received 0 Likes
on
0 Posts
Sonic,Phreak anyone?
What type of leads do you use for 4g15 DOHC? need to change this on mine, REpco suggested importing???
Surely there is a local type from any Mitsu in oz that can be use as a replacement..
What type of leads do you use for 4g15 DOHC? need to change this on mine, REpco suggested importing???
Surely there is a local type from any Mitsu in oz that can be use as a replacement..
#36
Newbie
Thread Starter
Join Date: Sep 2003
Location: melbourne
Posts: 22
Likes: 0
Received 0 Likes
on
0 Posts
Dohc spark plug leads looks completely differrent, sure about this sonic? where the sohc leads were slim and shallow, my current ones are deep and chunky to reach the spark plugs burried quiet deep at the rocker cover.
Mitsiman can you advise on this please?
Mitsiman can you advise on this please?
#38
Newbie
Thread Starter
Join Date: Sep 2003
Location: melbourne
Posts: 22
Likes: 0
Received 0 Likes
on
0 Posts
Thanks Mitsiman, WHat model\type name spark leads are they?
my local repco and autobarn dont seem to know this type of leads due to engine having been imported.
can you help on model\type number please?
my local repco and autobarn dont seem to know this type of leads due to engine having been imported.
can you help on model\type number please?
#40
Newbie
Thread Starter
Join Date: Sep 2003
Location: melbourne
Posts: 22
Likes: 0
Received 0 Likes
on
0 Posts
Thanks Miragehatchvrx,
But id rather buy new for peace of mind when it comes to ignition leads...
You never know what condition second hand are since visual inspection of my leads tells me nothing is wrong but had the car tune up lately and been told that cylinder 2 lead had some problem (cant remember the term mechanic referred to it) but ive had to make do with it by tightening leads with electrical tape.
So once again, anyone else there who has the same engine 4g15 DOHC, can you please help with what type\model ignition leads I require since this is not a known model engine at local repco and autobarn shops in melbourne.
As mitsiman also mentioned, at a pinch I may be able to use the SOHC leads but would rather not since the Sohc leads dont cover all of the hole for the spark plugs on rocker cover. I am worried water\condensation may accumulate.
But id rather buy new for peace of mind when it comes to ignition leads...
You never know what condition second hand are since visual inspection of my leads tells me nothing is wrong but had the car tune up lately and been told that cylinder 2 lead had some problem (cant remember the term mechanic referred to it) but ive had to make do with it by tightening leads with electrical tape.
So once again, anyone else there who has the same engine 4g15 DOHC, can you please help with what type\model ignition leads I require since this is not a known model engine at local repco and autobarn shops in melbourne.
As mitsiman also mentioned, at a pinch I may be able to use the SOHC leads but would rather not since the Sohc leads dont cover all of the hole for the spark plugs on rocker cover. I am worried water\condensation may accumulate.
#43
Newbie
Thread Starter
Join Date: Sep 2003
Location: melbourne
Posts: 22
Likes: 0
Received 0 Likes
on
0 Posts
Thanks Mitsiman,
I am located at melbourne so if I can source the ignition leads from you, I may as well time this with getting extractors from you as well to hopefully save on postal costs.
Just out of curiosity, are they available yet? just been regularly checking your website (RPW) and I cant seem to find the item (extractors for 4g15 Dohc) yet on your site.
Anyways, Ill just drop an email to you in the next few weeks.
I am located at melbourne so if I can source the ignition leads from you, I may as well time this with getting extractors from you as well to hopefully save on postal costs.
Just out of curiosity, are they available yet? just been regularly checking your website (RPW) and I cant seem to find the item (extractors for 4g15 Dohc) yet on your site.
Anyways, Ill just drop an email to you in the next few weeks.
#45
wassaap
hey guys been following the thread, have seen some interesting stuff about performance stuuf for my car. ck2 lancer glx...i recvently did the 4g15 dohc conversion with a tiptronic tranmission.......its stock right now...still in the breaking in stage.....have plans on turbocharging......
right now im doing 172 kmph on 3rd without overreving....however im running a stock ehaust from the sohc which i had before......(changeding to 2 1\2 inch extractors by next couple days....it has a 3" intake with a k&n cone filter on it... wat do u guys recommend...
right now im doing 172 kmph on 3rd without overreving....however im running a stock ehaust from the sohc which i had before......(changeding to 2 1\2 inch extractors by next couple days....it has a 3" intake with a k&n cone filter on it... wat do u guys recommend...