AMS/TMS Headstud Release
Thread Starter
Former Sponsor
iTrader: (42)
Joined: Oct 2003
Posts: 6,132
Likes: 3
From: West Chicago, IL
AMS/TMS Headstud Release
In our never ending Quest to offer the best and only the best AMS and Titan Motorsports have teamed up to offer you the best of the best in head studs.
The AMS/TMS Head Stud Package
With our experience building the worlds quickest, fastest and highest horsepower Evolution VIII and Titans experience building some of the fastest sport compact cars on the planet we both saw room for improvement in the head stud market.
We used our combined 10 plus years of experience to offer the following Head stud package
*The AMS/TMS stud is produced from L19/H11 Alloy steel, much stronger then the competitions 8740.
*The AMS/TMS stud is good from 210,000 - 260,000 psi as opposed to the competitions 180,000 - 210,000 rating
*This is a stock replacement stud that will bolt in to any 92.5-current 7 bolt motor and any Evo 4 to current motor. It carries the stock thread pitch, diameter and all.
*On top of the studs added strength, we also increased the size of the washer to increase the clamping surface area on the head. The competition uses a .80 inch outer diameter washer while the AMS/TMS stud uses a .90 inch Outer Diameter wahser, all while being able to maintain fitment in the head.
*complete with a Hex broach on the top of the stud enabling you to install the studs one by one while the head is on the car if needed.
With the limits we are all pushing this mighty mite of a motor to these days, AMS and Titan see this as a necessity in all High HP builds.
This piece is must for all engine builds from mild to wild. For the enthusiast that wants the best, please contact AMS or Titan Motorsports to pick up a set!
This is an introductory price for a limited time only!
$249.99
The AMS/TMS Head Stud Package
With our experience building the worlds quickest, fastest and highest horsepower Evolution VIII and Titans experience building some of the fastest sport compact cars on the planet we both saw room for improvement in the head stud market.
We used our combined 10 plus years of experience to offer the following Head stud package
*The AMS/TMS stud is produced from L19/H11 Alloy steel, much stronger then the competitions 8740.
*The AMS/TMS stud is good from 210,000 - 260,000 psi as opposed to the competitions 180,000 - 210,000 rating
*This is a stock replacement stud that will bolt in to any 92.5-current 7 bolt motor and any Evo 4 to current motor. It carries the stock thread pitch, diameter and all.
*On top of the studs added strength, we also increased the size of the washer to increase the clamping surface area on the head. The competition uses a .80 inch outer diameter washer while the AMS/TMS stud uses a .90 inch Outer Diameter wahser, all while being able to maintain fitment in the head.
*complete with a Hex broach on the top of the stud enabling you to install the studs one by one while the head is on the car if needed.
With the limits we are all pushing this mighty mite of a motor to these days, AMS and Titan see this as a necessity in all High HP builds.
This piece is must for all engine builds from mild to wild. For the enthusiast that wants the best, please contact AMS or Titan Motorsports to pick up a set!
This is an introductory price for a limited time only!
$249.99
Last edited by AutoMotoSports; Jun 16, 2006 at 03:43 PM.
