Another AMS EVO in the 8's!
#28
Evolved Member
Thread Starter
iTrader: (62)
Join Date: Apr 2006
Posts: 578
Likes: 0
Received 0 Likes
on
0 Posts
I got the ignition right on time but other things kept jumping up at me that HAD to be done so I didnt get a chance to install it. It doesnt matter though as when I got there I only was able to make one pass due to problems with the track. I am hopefully going to get it on this week and will be going back in the very near future.
#30
Evolved Member
Thread Starter
iTrader: (62)
Join Date: Apr 2006
Posts: 578
Likes: 0
Received 0 Likes
on
0 Posts
Alright... I was planning on making one big video at the end of the year with the dyno and the track passes on it but I have yet to have time to get back to the track so for you guys I will post up the dyno video.
For those that dont know my original ignition consisted of a MSD DIS-2 and MSD Coil packs and wires. It did well up until we got to about 40 lbs of boost... it started to mis-fire no matter how we gapped the plugs. So I had Sparktech put me together a system that consisted of a Pro-14 box and their DSM coil on plug.
I got it back on the dyno and we were able to run the plugs right out of the box, crank up the boost and good things happend...
For those that dont know my original ignition consisted of a MSD DIS-2 and MSD Coil packs and wires. It did well up until we got to about 40 lbs of boost... it started to mis-fire no matter how we gapped the plugs. So I had Sparktech put me together a system that consisted of a Pro-14 box and their DSM coil on plug.
I got it back on the dyno and we were able to run the plugs right out of the box, crank up the boost and good things happend...