My new summer wheels should be arriving pretty soon, so I may as well get the for sale thread going for my existing set.

Work XSA-03C, 18"x9.5" +12 offset, R disk all round.
Drilled at the factory to accomodate TPMS via a secondary valve stem location on the back of the wheel (TPMS NOT included).
Black Work valve stems and caps.
Black Work 'W' logo centre caps (took me forever to get these in the correct size)

I ran them in the finish I originally ordered them with for the first summer, matt black centres with a polished lip. When they were off for winter I decided to get them powder coated satin black, and that's the way the way they sit right now.

They currently have tires mounted, but these will likely have to come off so I can get the TPMS out. The tires don't have much life left anyway, but if you're local and want to grab them you're more than welcome to have them. In fact you're welcome to the tires wherever you live, but it's unlikely worth the additional cost of shipping.

No curb rash....I have pics of every wheel in it's current condition!
Small paint chip on the very edge of one rim and a tiny chip, similarly located on another rim. Light surface scratch (can be polished out) on one rim. Pics included of these items.

$1750 + shipping OBO

ps - mods, I realize all the pics should have a label in them, but I forgot to add it while taking the exterior pics, hence the 'additional' pics from the basement. If it's an issue, let me know and I'll haul the wheels back upstairs again.

As the wheels are today. Off the car (since late October), cleaned and ready to go bar removal of TPMS/tires












As they looked on the car last summer:-